Differences

This shows you the differences between two versions of the page.

--- vrm_portal:remote-veconfigure [2023-05-15 14:18] – mvader
+++ vrm_portal:remote-veconfigure [2024-11-13 13:16] (current) – guy_stewart
@@ Line 12: / Line 12: @@
   - A GX Device running Venus OS v2.17 or later (latest official version is preferred)
   - System must connected to internet and communicating to the VRM Portal.
-  - Two way communication must be enabled
+  - The ''Full'' access setting, which is on the [[venus-os:start|GX device]] menu -> Settings -> VRM Online Portal -> VRM Portal must be enabled.
   - The [[venus-os:start|GX device]] must be powered directly from the battery. So do not power it an AC adapter on the AC output of the inverter/charger.
   - [[https://docs.victronenergy.com/veconfigure.html|VEConfigure]]
@@ Line 34: / Line 34: @@
   - Check the requirements
     - Venus OS v2.17 or later
-    - Two way communication enabled (see Settings -> VRM Online Portal on the [[venus-os:start|GX device]])
+    - The ''Full'' access mode setting, which is on the [[venus-os:start|GX device]] menu -> Settings -> VRM Online Portal -> VRM Portal must be enabled.
-    - Two way communication up & running: check on the Device list page on VRM
+    - ''Full'' access mode up & running: check on the Device list page on VRM
   - On the VRM Portal, go to Device List, and scroll to the bottom to find the Remote VEConfigure button on the VRM Portal
   - Click the button and wait