Differences

This shows you the differences between two versions of the page.

--- vrm_portal:remote-veconfigure [2020-03-15 09:22] – [1. Introduction] mvader
+++ vrm_portal:remote-veconfigure [2020-08-17 13:22] – mvader
@@ Line 4: / Line 4: @@
 This manual describes how to remotely change settings in our MultiPlusses, MultiGrid, MultiPlus-II, Quattros and high power Inverters; all power products with a VE.Bus communication port. A feature called ''Remote VEConfigure''.
+===== 2. Requirements and limitations =====
 This functionality requires a [[venus-os:start|GX device]] (CCGX, Venus GX or other) to be installed locally on the system.
@@ Line 24: / Line 26: @@
 In some cases the VE.Bus system will momentarily switched off when changing the configuration.
-===== 2. Step by step procedure =====
+===== 3. Step by step procedure =====
 {{youtube>nK-N-bU1gXo?medium}}
@@ Line 41: / Line 43: @@
   - Be Aware - If the file is saved via the File, Save As menu, instead of closing VEConfigure and confirming the changes, it will save to a new .VSC file. This file can be opened, adjusted, and used to update locally with an MK3 adapter, but it cannot be uploaded to update a remote unit. You must use the .RVSC file downloaded from the system that you intend to change the settings of, and then upload that same file once changes are made.
-===== 3. System shutdown during reconfiguration =====
+===== 4. System shutdown during reconfiguration =====
 Many settings can be changed without resulting in a shutdown during the re-configuration. Some settings though, such as a changed Assistants configuration, will cause the inverter/charger to momentarily switch off and back on again. In such situations, VEConfig will warn when saving the settings: