Differences

This shows you the differences between two versions of the page.

--- vrm_portal:remote-veconfigure [2019-02-05 10:05] – [2. Step by step procedure] mvader
+++ vrm_portal:remote-veconfigure [2019-03-25 12:07] – [3. System shutdown during reconfiguration] Added reset issue jpasop
@@ Line 39: / Line 39: @@
   - Upload the file to the system
-==== 3. System shutdown during reconfiguration ====
+===== 3. System shutdown during reconfiguration =====
 Many settings can be changed without resulting in a shutdown during the re-configuration. Some settings though, such as a changed Assistants configuration, will cause the inverter/charger to momentarily switch off and back on again. In such situations, VEConfig will warn when saving the settings:
 {{ :ccgx:remote-veconfig-vebus-reset-warning.png?nolink |}}
+known issue: Venus versions v2.23 and below always reset the Multi when the following settings are changed.
+  - Battery Capacity
+  - Start and stop limits for low power AES mode
+  - State of charge when Bulk finished (only resets with Multi firmware versions < 200)
 Depending on how the internet communication equipment (ie. router) is powered, the internet connection might also be temporarily lost at that time.