Differences

This shows you the differences between two versions of the page.

--- vrm_portal:remote-veconfigure [2019-01-22 10:41] – external edit 127.0.0.1
+++ vrm_portal:remote-veconfigure [2019-03-11 09:29] – mvader
@@ Line 32: / Line 32: @@
     - Two way communication up & running: check on the Device list page on VRM
   - On the VRM Portal, go to Device List, and scroll to the bottom to find the Remote VEConfigure button on the VRM Portal
+  - Click the button and wait
+    - the system starts with reading all the settings of each inverter/charger in the system. This takes approximately 85 seconds per unit; and in case [[assistants:start|VEConfigure Assistants]] are used; ten it will take longer: writing an Assistants takes anything between a few and 40 seconds per unit.
+    - once all data has been gathered; its compiled into a file and uploaded to your computer.
   - Download the file to your computer
   - Modify the configuration, save the file using the Close button in VEConfigure on the upport right. This will automatically save the settings. It is not necessary, and also not possible, to save it via the file menu.
   - Upload the file to the system
-==== 3. System shutdown during reconfiguration ====
+===== 3. System shutdown during reconfiguration =====
 Many settings can be changed without resulting in a shutdown during the re-configuration. Some settings though, such as a changed Assistants configuration, will cause the inverter/charger to momentarily switch off and back on again. In such situations, VEConfig will warn when saving the settings: