Differences

This shows you the differences between two versions of the page.

--- vrm_portal:remote-veconfigure [2018-12-06 13:57] – guy_stewart
+++ vrm_portal:remote-veconfigure [2018-12-28 11:58] – [1. Introduction] mvader
@@ Line 8: / Line 8: @@
 Requirements:
-  * Venus OS v2.17 or later
+  - Venus OS v2.17 or later
-  * System must connected to internet and communicating to the VRM Portal.
+  - System must connected to internet and communicating to the VRM Portal.
-  * Two way communication must be enabled
+  - Two way communication must be enabled
+  - The [[venus-os:start|Venus-device]] must be powered directly from the battery. So do not power it an AC adapter on the AC output of the inverter/charger.
 Details:
@@ Line 43: / Line 44: @@
 This is not a problem, as the file is first uploaded to the [[venus-os:start|Venus-device]], and only once received and verified it will be written to the VE.Bus system.
-However, it is required to make sure that the [[venus-os:start|Venus-device]] is not switched off during the reconfiguration. In other words: do not power the [[venus-os:start|Venus-device]] with an AC adapter on the AC output of the system. It is usually best to power it from a reliable DC supply such as the batteries.