Differences

This shows you the differences between two versions of the page.

--- victronconnect:ve-smart-networking [2019-08-15 12:36] – replace venus-device with GX device guy_stewart
+++ victronconnect:ve-smart-networking [2019-10-01 12:44] – [3.1 VE.Smart Networking compatible products] mvader
@@ Line 21: / Line 21: @@
 ==== 3.1 VE.Smart Networking compatible products ====
-^Product range     ^ Compatible ^ [[https://www.victronenergy.com/accessories/ve-direct-bluetooth-smart-dongle|Requires VE.Direct Bluetooth Smart dongle]] ^ Function ^
+^Product range     ^ Compatible ^ Function ^
-|BMV-700           | Yes | Yes | Voltage-sense |
+|BMV-700           | Yes (requires [[https://www.victronenergy.com/accessories/ve-direct-bluetooth-smart-dongle|dongle accessory]]) | Transmit voltage-sense |
-|BMV-702           | Yes | Yes | Voltage-sense, and (optionally) temperature  <sup> (1)</sup> |
+|BMV-702           | Yes (requires [[https://www.victronenergy.com/accessories/ve-direct-bluetooth-smart-dongle|dongle accessory]]) | Transmit voltage-sense, and (optionally) temperature  <sup> (1)</sup> |
-|BMV-712           | Yes | No, has built in bluetooth | Voltage-sense, and (optionally) temperature <sup> (1)</sup> |
+|BMV-712           | Yes | Transmit voltage-sense, and (optionally) temperature <sup> (1)</sup> |
-|SmartSolar MPPTs  | Yes <sup> (2)</sup>| No, has built in bluetooth | Uses received sense data to optimize charging |
+|SmartSolar MPPTs  | Yes <sup> (2)</sup> | Uses received sense data to optimize charging |
-|BlueSolar MPPTs   | Yes | Yes | Uses received sense data to optimize charging |
+|BlueSolar MPPTs   | Yes | Uses received sense data to optimize charging |
+|Phoenix Smart IP43 Charger   | No | Not yet supported, may be compatible in the future |
+|Orion-Tr Smart DC-DC Charger Isolated   | No | Not yet supported, may be compatible in the future |
   - To measure battery temperature, the [[https://www.victronenergy.com/accessories/temperature-sensor-for-bmv-702|BMV series temperature sensor is required]].
@@ Line 43: / Line 44: @@
 |SmartSolar MPPT 250/100          |SCC125110210 (before s/n HQ1811) \\ SCC125110310 (before s/n HQ1811)|SCC125110210 (after s/n HQ1811) \\ SCC125110310 (after s/n HQ1811) |
-Note that when listed as not compatible; they will also not become compatible later. The incompatibility is due to a hardware limitation in those devices.
+Note that when listed as **Incompatible**, that model will also not become compatible later. The incompatibility is due to a hardware limitation in those devices. There is a work around: connecting a [[https://www.victronenergy.com/accessories/ve-direct-bluetooth-smart-dongle|VE.Direct Bluetooth Smart dongle]] to such (by itself incompatible) SmartSolar charger model, will **enable** VE.Smart Networking support. Both Voltage and Temperature sense will work. In such scenario the internal Bluetooth interface of the SmartSolar should not be used anymore as communication errors may occur - instead the VE.Direct Bluetooth Smart dongle is to be used when connecting by phone or tablet.
-Also note that connecting a VE.Direct Bluetooth Smart dongle (ASS030536011) to an incompatible SmartSolar charger, will **enable** VE.Smart Networking support for the SmartSolar (Voltage and Temperature sense). In such scenario the internal Bluetooth interface of the SmartSolar should not be used anymore as communication errors may occur - instead the VE.Direct Bluetooth Smart dongle is to be used when connecting by phone or tablet.
 ==== 3.2 Limitations ====
   * The maximum number of devices which can be connected on one network is 25.
@@ Line 107: / Line 110: @@
 ===== DISQUS =====
 ~~DISQUS~~