Victron Energy

User Tools

Site Tools

You are here: Documentation » victronconnect
victronconnect:start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Next revisionBoth sides next revision
victronconnect:start [2020-02-04 12:00] – [IMPULSE-II Smart Charger] mbosmavictronconnect:start [2020-02-14 09:17] – [Battery Chargers] mbosma
Line 347: Line 347:
 **Via VE.Direct:** Connect the product with a VE.Direct to USB cable to your PC or Android device and use VictronConnect to re-enable Bluetooth in the **Product Info** page (see instructions above on how to reach the Product info page). **Via VE.Direct:** Connect the product with a VE.Direct to USB cable to your PC or Android device and use VictronConnect to re-enable Bluetooth in the **Product Info** page (see instructions above on how to reach the Product info page).
  
-**[[https://www.victronenergy.com/chargers|Blue and Phoenix Smart Chargers]]:** In all smart battery chargers, Bluetooth is temporarily enabled at power-up for 30 seconds. You can connect within these 30 seconds to perform a firmware update or re-enable Bluetooth. If you do not connect within the first 30 seconds Bluetooth will be disabled.+**[[https://www.victronenergy.com/chargers/phoenix-smart-ip43-charger|Phoenix Smart IP43 Chargers]]:** Bluetooth is temporarily enabled at power-up for 30 seconds. You can connect within these 30 seconds to perform a firmware update or re-enable Bluetooth. If you do not connect within the first 30 seconds Bluetooth will be disabled. 
 + 
 +**[[https://www.victronenergy.com/chargers|Blue Smart IP22 & IP65 Chargers]]:** Once Bluetooth is disabled, it can be re-enabled with the MODE button. See below. 
 + 
 +**[[https://www.victronenergy.com/chargers/blue-smart-ip67-charger-waterproof|Blue Smart IP67 Chargers]]:** For these chargers there are two options: 
 +  - Temporarily enabled at power-up for 30s: You can connect within these 30 seconds to perform a firmware update or re-enable Bluetooth. If you do not connect within the first 30 seconds Bluetooth will be disabled. 
 +  - Permanently disabled: __Once Bluetooth is disabled, it can not be re-enabled.__
  
 **[[https://www.victronenergy.com/solar-charge-controllers|SmartSolar MPPTs]]:** Connect the product with a VE.Direct to USB cable to your PC or Android device and use VictronConnect to re-enable Bluetooth in the **Product Info** page (see instructions above on how to reach the Product info page). **[[https://www.victronenergy.com/solar-charge-controllers|SmartSolar MPPTs]]:** Connect the product with a VE.Direct to USB cable to your PC or Android device and use VictronConnect to re-enable Bluetooth in the **Product Info** page (see instructions above on how to reach the Product info page).
Line 837: Line 843:
  
 (1) For those with a technical background and wondering how, why and what minimising has to do with this: yes this really works, and relates to a power saving mode that has a side effect on serial communication. (1) For those with a technical background and wondering how, why and what minimising has to do with this: yes this really works, and relates to a power saving mode that has a side effect on serial communication.
 +
 ===== 11. Compatible Victron products ===== ===== 11. Compatible Victron products =====
  
-==== SmartSolar MPPT Charge controllers ====+==== Solar Chargers ==== 
 + 
 +=== SmartSolar MPPT Charge controllers ===
 ^                         ^ USB via VE.Direct port ^ Wireless Via Bluetooth ^ ^                         ^ USB via VE.Direct port ^ Wireless Via Bluetooth ^
 | MPPT 75/10             | [[https://www.victronenergy.com/accessories/ve-direct-to-usb-interface|VE.Direct to USB accessory required]]            | Yes - Built in         | | MPPT 75/10             | [[https://www.victronenergy.com/accessories/ve-direct-to-usb-interface|VE.Direct to USB accessory required]]            | Yes - Built in         |
Line 866: Line 875:
 The same models, but then with a different part number do support using both the VE.Direct port and the built-in Bluetooth Smart function at the same time. As do all other SmartSolar MPPT models. The same models, but then with a different part number do support using both the VE.Direct port and the built-in Bluetooth Smart function at the same time. As do all other SmartSolar MPPT models.
  
-==== Blue Smart IP22 Chargers ==== +=== BlueSolar MPPT Charge controllers ===
-^                               ^ USB via VE.Direct port ^ Wireless Via Bluetooth ^ Charge cycle history ^ Advanced settings ^ +
-| All Blue Smart IP22 Chargers | No             | Yes - Built in                       | No | No | +
- +
-==== Blue Smart IP65 Chargers ==== +
-^                               ^ USB via VE.Direct port ^ Wireless Via Bluetooth ^ Charge cycle history ^ Advanced settings ^ +
-| Blue Smart IP65 12/25 Charger  | No             | Yes - Built in                       | Yes | Yes | +
-| Blue Smart IP65 24/13 Charger  | No             | Yes - Built in                       | Yes | Yes | +
-| Other Blue Smart IP65 Chargers | No             | Yes - Built in                       | No  | No  | +
- +
-==== Blue Smart IP67 Chargers ==== +
-^                               ^ USB via VE.Direct port ^ Wireless Via Bluetooth ^ Charge cycle history ^ Advanced settings ^ +
-| All Blue Smart IP67 Chargers  | No             | Yes - Built in                       | No | No | +
- +
- +
- +
-==== Phoenix Smart IP43 Charger ==== +
-^                               ^ USB via VE.Direct port ^ Wireless Via Bluetooth ^ Charge cycle history ^ Advanced settings ^ +
-| All Phoenix Smart IP43 Chargers  | Yes            | Yes - Built in                       | No | No | +
- +
-==== IMPULSE-II Smart Charger ==== +
-^                               ^ USB via VE.Direct port ^ Wireless Via Bluetooth ^ Charge cycle history ^ Advanced settings ^ +
-| All IMPULSE-II Smart Chargers  | No | Yes - Built in                       | Yes - Since firmware v3.09 | No | +
- +
-==== Orion-Tr Smart DC-DC Charger Isolated ==== +
-^                               ^ USB via VE.Direct port ^ Wireless Via Bluetooth ^ +
-| All Orion-Tr Smart DC-DC Isolated Chargers   | No             | Yes - Built in                       | +
- +
-==== Battery Monitors ==== +
-^          ^ USB via VE.Direct port ^ Wireless Via Bluetooth ^ +
-| BMV-700  | [[https://www.victronenergy.com/accessories/ve-direct-to-usb-interface|VE.Direct to USB accessory required]]            | [[https://www.victronenergy.com/accessories/ve-direct-bluetooth-smart-dongle|VE.Direct to Bluetooth accessory required]]       | +
-| BMV-702  | [[https://www.victronenergy.com/accessories/ve-direct-to-usb-interface|VE.Direct to USB accessory required]]           | [[https://www.victronenergy.com/accessories/ve-direct-bluetooth-smart-dongle|VE.Direct to Bluetooth accessory required]]       | +
-| BMV-700H | [[https://www.victronenergy.com/accessories/ve-direct-to-usb-interface|VE.Direct to USB accessory required]]           | [[https://www.victronenergy.com/accessories/ve-direct-bluetooth-smart-dongle|VE.Direct to Bluetooth accessory required]]       | +
-| BMV-712  | [[https://www.victronenergy.com/accessories/ve-direct-to-usb-interface|VE.Direct to USB accessory required]]           | Yes - Built in         | +
-==== BlueSolar MPPT Charge controllers ====+
 ^                         ^ USB via VE.Direct port ^ Wireless Via Bluetooth ^ ^                         ^ USB via VE.Direct port ^ Wireless Via Bluetooth ^
 | MPPT 70/15              | Not compatible || | MPPT 70/15              | Not compatible ||
Line 919: Line 894:
  
  
 +==== Battery Chargers ====
  
 +^ Blue Smart IP22                 ^ USB via VE.Direct port ^ Wireless Via Bluetooth ^ Bluetooth on/off           ^ Charge cycle history       ^ Advanced settings ^
 +| All Blue Smart IP22 Chargers    | No                     | Yes - Built in         | Yes - Since firmware v3.12 | No                         | No                |
 +^ Blue Smart IP65                 ^ USB via VE.Direct port ^ Wireless Via Bluetooth ^ Bluetooth on/off           ^ Charge cycle history       ^ Advanced settings ^
 +| Blue Smart IP65 12/25 Charger   | No                     | Yes - Built in         | Yes                        | Yes                        | Yes               |
 +| Blue Smart IP65 24/13 Charger   | No                     | Yes - Built in         | Yes                        | Yes                        | Yes               |
 +| Other Blue Smart IP65 Chargers  | No                     | Yes - Built in         | Yes - Since firmware v3.12 | No                         | No                |
 +^ Blue Smart IP67                 ^ USB via VE.Direct port ^ Wireless Via Bluetooth ^ Bluetooth on/off           ^ Charge cycle history       ^ Advanced settings ^
 +| All Blue Smart IP67 Chargers    | No                     | Yes - Built in         | Yes - Since firmware v3.12 | No                         | No                |
 +^ Phoenix Smart IP43              ^ USB via VE.Direct port ^ Wireless Via Bluetooth ^ Bluetooth on/off           ^ Charge cycle history       ^ Advanced settings ^
 +| All Phoenix Smart IP43 Chargers | Yes                    | Yes - Built in         | Yes                        | No                         | No                |
 +^ IMPULSE-II Smart                ^ USB via VE.Direct port ^ Wireless Via Bluetooth ^ Bluetooth on/off           ^ Charge cycle history       ^ Advanced settings ^
 +| All IMPULSE-II Smart Chargers   | No                     | Yes - Built in         | Yes - Since firmware v3.09 | Yes - Since firmware v3.09 | No                |
 +
 +
 +==== Orion-Tr Smart DC-DC Charger Isolated ====
 +^                               ^ USB via VE.Direct port ^ Wireless Via Bluetooth ^
 +| All Orion-Tr Smart DC-DC Isolated Chargers   | No             | Yes - Built in                       |
 +
 +==== Battery Monitors ====
 +^          ^ USB via VE.Direct port ^ Wireless Via Bluetooth ^
 +| BMV-700  | [[https://www.victronenergy.com/accessories/ve-direct-to-usb-interface|VE.Direct to USB accessory required]]            | [[https://www.victronenergy.com/accessories/ve-direct-bluetooth-smart-dongle|VE.Direct to Bluetooth accessory required]]       |
 +| BMV-702  | [[https://www.victronenergy.com/accessories/ve-direct-to-usb-interface|VE.Direct to USB accessory required]]           | [[https://www.victronenergy.com/accessories/ve-direct-bluetooth-smart-dongle|VE.Direct to Bluetooth accessory required]]       |
 +| BMV-700H | [[https://www.victronenergy.com/accessories/ve-direct-to-usb-interface|VE.Direct to USB accessory required]]           | [[https://www.victronenergy.com/accessories/ve-direct-bluetooth-smart-dongle|VE.Direct to Bluetooth accessory required]]       |
 +| BMV-712  | [[https://www.victronenergy.com/accessories/ve-direct-to-usb-interface|VE.Direct to USB accessory required]]           | Yes - Built in         |
  
  
Line 970: Line 970:
  
 ==== MultiPlus, EasySolar, Quattro, Phoenix Inverter with VE.Bus, and similar products ==== ==== MultiPlus, EasySolar, Quattro, Phoenix Inverter with VE.Bus, and similar products ====
 +
 This section applies to MultiPlus, MultiPlus-II, MultiCompact, Multi (the models introduced in 2018), Quattro, EasySolar, EasySolar-II, MultiGrid and ECOMultis. This section applies to MultiPlus, MultiPlus-II, MultiCompact, Multi (the models introduced in 2018), Quattro, EasySolar, EasySolar-II, MultiGrid and ECOMultis.
  
victronconnect/start.txt · Last modified: 2021-01-11 13:04 by boekel
Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki