Differences

This shows you the differences between two versions of the page.

--- victronconnect:start [2019-09-20 10:46] – [9.4 Error codes] evandromr
+++ victronconnect:start [2019-09-21 12:15] – [4.3 Android devices] guy_stewart
@@ Line 127: / Line 127: @@
 ==== 4.3 Android devices ===
-The minimum required Android version to run VictronConnect is 4.1.
+The minimum required Android version to run VictronConnect is 5.0.
-The minimum required Android version to connect to a Victron product via Bluetooth is 4.3.
+Required hardware is ARMv7 and later, as well as x86 or ARM64bit.
-Required hardware is ARMv7 and later, as well as x86.
-=== Android 4.1 and 4.2 ===
-You may find that USB On-The-Go (USB OTG) does work on devices with Android 4.1 or 4.2.
-Even though some devices have Bluetooth 4.0 aka Bluetooth Smart hardware, Android versions earlier than 4.3 are not implemented such that they can be used by VictronConnect. If you are using a device running on version before 4.3, VictronConnect will not be able to see, nor connect to Victron Bluetooth Smart products.
-=== Android 4.3 and 4.4 ===
-No known issues.
 === Android 5 ===
@@ Line 189: / Line 177: @@
 *Assumes the device runs the latest firmware released by the manufacturer.
 ==== 4.4 Apple iOS iPhones and iPads ===
-VictronConnect works on the following iPhones and iPads, which have Bluetooth 4.0 (BT LE).\\ (iOS 8 or later required):
+VictronConnect works on the following iPhones and iPads running iOS 11 or later:
-  * iPhone 4S and later (due to Bluetooth Low Energy support)
+  * iPhone 5S and later.
-  * iPad, 3rd generation and later
+  * iPad mini 2 and later
+  * iPad (5th generation) and later
+  * iPod touch (6th generation) and later
 Unfortunately Apple iPhone/iPad doesn't support USB OTG.