victronconnect:mppt-solarchargers
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | Next revisionBoth sides next revision | ||
victronconnect:mppt-solarchargers [2019-01-22 10:16] – external edit 127.0.0.1 | victronconnect:mppt-solarchargers [2019-02-09 00:39] – [4.1 Battery settings] mvader | ||
---|---|---|---|
Line 177: | Line 177: | ||
=== Low temperature cut-off === | === Low temperature cut-off === | ||
- | This setting is available when a VE.Smart network is set-up and the battery temperature is available (e.g. by using a Smart Battery Sense or a Smart BMV with a temperature sensor). It can be used to disable charging at low temperatures as required by Lithium batteries. | + | This setting is available when a VE.Smart network is set-up and the battery temperature is available (e.g. by for example |
For Lithium Iron Phosphate batteries this setting is preset at 5 degrees Celsius, for the other battery types it is disabled. When creating a user defined battery the cut-off temperature level can be adjusted manually. | For Lithium Iron Phosphate batteries this setting is preset at 5 degrees Celsius, for the other battery types it is disabled. When creating a user defined battery the cut-off temperature level can be adjusted manually. | ||
+ | See the [[victronconnect: | ||
==== 4.2 Load output | ==== 4.2 Load output | ||
This section applies to all products. These settings are typically used on the smaller models which have a dedicated load output (75/10, 75/15, 100/15 and 100/20). | This section applies to all products. These settings are typically used on the smaller models which have a dedicated load output (75/10, 75/15, 100/15 and 100/20). |
victronconnect/mppt-solarchargers.txt · Last modified: 2021-09-30 07:16 by guystewart