User Tools

Site Tools


venus-os:v2.60

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
venus-os:v2.60 [2020-06-29 22:21] – [B) Changes to the NMEA2000-out chapter] mvadervenus-os:v2.60 [2020-07-04 01:28] – [Introduction] mvader
Line 17: Line 17:
   - (optional - only when using ModbusTCP protocol): only enable ModbusTCP on one of the GX Devices   - (optional - only when using ModbusTCP protocol): only enable ModbusTCP on one of the GX Devices
   - Only connect the main GX Device to VRM; it will also transmit tank levels received from the secondary units.   - Only connect the main GX Device to VRM; it will also transmit tank levels received from the secondary units.
-  - And so forth.+  - We recommend to connect all VE.Bus and VE.Direct products to the main GX Device. Connecting the via a secondary device will work, but has limitations. For example that Remote configuration doesn’t work, DVCC control will not work, and neither will remote firmware updates. Expanding the VE.Direct ports through USB does give full functionality, which is therefor the recommended method. More information about thus in chapter 1.4.?.
  
 ==== Steps to configure ==== ==== Steps to configure ====
venus-os/v2.60.txt · Last modified: 2020-12-15 16:49 by mvader

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki