Differences

This shows you the differences between two versions of the page.

--- venus-os:mfd-raymarine [2019-11-13 11:19] – mbosma
+++ venus-os:mfd-raymarine [2020-03-26 17:05] – [1. Introduction] mvader
@@ Line 1: / Line 1: @@
 ====== Raymarine MFD Integration ======
-This manual is still being actively developed.
 ===== 1. Introduction =====
-The integration technology used is called [[http://www.raymarine.com/multifunction-displays/lighthouse3/lighthouse-apps.html|LightHouse Apps]].
+This document explains how to connect to Raymarine MFDs using an Ethernet connection.
+The integration technology used is called [[http://www.raymarine.com/multifunction-displays/lighthouse3/lighthouse-apps.html|LightHouse Apps]] by Raymarine.
+TThere is also another way to connect, which by NMEA2000. See the [[https://www.victronenergy.com/live/ccgx:start#marine_mfd_integration_by_nmea_2000|NMEA2000 chapter in the main manual]].
 ===== 2. Compatibility =====
 The MFD integration is compatible with the Axiom, Axiom Pro and Axiom XL MFDs running on LightHouse 3. The eS & gS Series multifunction displays which have been upgraded to LightHouse 3 are **not** compatible.
-Raymarine MFDs need at least LightHouse v3.11 for compatibility.
+Raymarine MFDs need at least LightHouse v3.11 for compatibility, which was released in November 2019.
 ===== 3. Wiring =====
@@ Line 24: / Line 24: @@
   * A80513 - RayNet male to RJ45 adaptor cable
+Connecting a Axiom MFD to a network router lead ls to IP address conflicts, due to the integrated DHCP server.
+To connect the [[https://www.victronenergy.com/live/venus-os:start|GX device]] to the internet as well, use WiFi
 ===== 4. Configuration =====
-On the Victron GX Device, go to Settings → Services, and there enable MQTT.
+On the Victron GX Device, go to Settings → Services, and there enable both MQTT on LAN (SSL) and MQTT on LAN (Plaintext).
 Next, go to Settings → System Setup → Scroll to the bottom → Battery measurements. And there set up what batteries you want to see on the MFD; and by what name.
 No other settings, such as IP addresses or similar are required, since the Axiom MFDs have an integrated DHCP server.
+===== 5. Configuring Multiple Battery Measurements =====
-===== 5. Configuring Multiple Battery Monitors =====
+This video explains how to setup multiple battery measurements, and naming them.
 {{youtube>0Mrk5Q4izvg?large}}