User Tools

Site Tools


venus-os:mfd-garmin

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
venus-os:mfd-garmin [2020-06-22 09:27]
mbosma [4.2. Networking]
venus-os:mfd-garmin [2020-06-25 12:26] (current)
mbosma
Line 53: Line 53:
  
 {{youtube>​0Mrk5Q4izvg}} {{youtube>​0Mrk5Q4izvg}}
- 
  
 ===== 6. Step by Step ===== ===== 6. Step by Step =====
Line 63: Line 62:
 {{:​venus-os:​garmin-gx_6.jpg?​nolink|}} {{:​venus-os:​garmin-gx_6.jpg?​nolink|}}
  
 +===== 7. NMEA 2000 =====
 +
 +The MFD can also be connected to the GX device using NMEA 2000, see [[https://​www.victronenergy.com/​live/​ccgx:​start#​marine_mfd_integration_by_nmea_2000|NMEA2000 chapter in the main manual]].
 +
 +The MFD can be configured easily to display the data from the GX device. There is no need to change any instance.\\
 +To setup NMEA 2000 on the MFD, go to //Settings > Communications > NMEA 2000 Setup > Device List//. Here you can view information about the connected products and change their names. Note that the names are stored on the MFD and not on the NMEA 2000 device.
 +
 +The following Victron related PGNs are supported:
 +  * 127505 - Fluid level (tanks)
 +  * 127506 - DC Detailed Status; State-of-charge,​ Time-to-go
 +  * 127508 - Battery Status; Voltage, current
 +
 +The supported PGNs may vary per model. Please consult the manual of the MFD for a list of supported PGNs.
  
venus-os/mfd-garmin.txt · Last modified: 2020-06-25 12:26 by mbosma