User Tools

Site Tools


venus-os:mfd-garmin

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
venus-os:mfd-garmin [2019-12-03 17:23]
mvader [Garmin MFD integration]
venus-os:mfd-garmin [2020-03-26 17:05] (current)
mvader [1. Introduction]
Line 4: Line 4:
 ===== 1. Introduction ===== ===== 1. Introduction =====
  
 +This document explains how to connect to Garmin MFDs using an Ethernet connection.
 The integration technology used is called [[https://​www.garmin.com/​en-US/​onehelm|Garmin OneHelm]]. The integration technology used is called [[https://​www.garmin.com/​en-US/​onehelm|Garmin OneHelm]].
 +
 +There is also another way to connect, which by NMEA2000. See the [[https://​www.victronenergy.com/​live/​ccgx:​start#​marine_mfd_integration_by_nmea_2000|NMEA2000 chapter in the main manual]].
  
 ===== 2. Compatibility ===== ===== 2. Compatibility =====
Line 29: Line 32:
 ==== 4.1. GX device settings ==== ==== 4.1. GX device settings ====
    
-  - Go to Settings -> Services, and there enable MQTT.+  - Go to Settings -> Services, and there enable ​both MQTT on LAN (SSL) and MQTT on LAN (Plaintext).
   - Go to Settings -> System Setup -> Scroll to the bottom -> Battery measurements. And there set up what batteries you want to see on the MFD, and by what name. Make sure to check out [[https://​www.dropbox.com/​s/​nlvqttx320zyaba/​Battery%20Measurements.mov?​dl=0|this video, which shows how to configure the batteries to be visible on the MFD]]   - Go to Settings -> System Setup -> Scroll to the bottom -> Battery measurements. And there set up what batteries you want to see on the MFD, and by what name. Make sure to check out [[https://​www.dropbox.com/​s/​nlvqttx320zyaba/​Battery%20Measurements.mov?​dl=0|this video, which shows how to configure the batteries to be visible on the MFD]]
   - For boats; and other applications with DC loads such as lighting and a Battery Monitor installed, make sure to enable the "Has DC system setting"​. For more information about it; see the [[https://​www.victronenergy.com/​live/​ccgx:​start|GX Manual]].   - For boats; and other applications with DC loads such as lighting and a Battery Monitor installed, make sure to enable the "Has DC system setting"​. For more information about it; see the [[https://​www.victronenergy.com/​live/​ccgx:​start|GX Manual]].
venus-os/mfd-garmin.1575390196.txt.gz · Last modified: 2019-12-03 17:23 by mvader