Differences

This shows you the differences between two versions of the page.

--- venus-os:mfd-garmin [2019-10-19 04:17] – guy_stewart
+++ venus-os:mfd-garmin [2023-06-22 19:35] (current) – sloges
@@ Line 1: / Line 1: @@
-====== Garmin MFD integration ======
+====== Garmin MFD Integration ======
-Preliminary manual
-===== Introduction =====
-The integration technology used is called [[https://www.garmin.com/en-US/onehelm|Garmin OneHelm]].
-===== Compatibility =====
-OneHelm is currently available for the GPSMAP® 8400/8600 MFD series.
-Also, Active Captain is supported. This screenshot shows ActiveCaptain, with the Victron App:
-{{:venus-os:garmin_gx.jpeg?nolink&800|}}
-===== Wiring =====
-The Garmin needs to be connected to the [[https://www.victronenergy.com/live/venus-os:start|GX device ]] using Ethernet. Its not possible to connect over WiFi. For the ethernet connection, a Garmin adapter is required:
-  * Marine Network Cables - 6ft - PART NUMBER 010-10550-00
-  * Marine Network Cables - 20ft - PART NUMBER 010-10551-00
-  * Marine Network Cables - 40ft - PART NUMBER 010-10552-00
-  * Marine Network Cables - 500ft - PART NUMBER 010-10647-01
-===== Configuration =====
-==== GX device settings ====
-  - Ordered List Item
-  - Go to Settings -> Services, and there enable MQTT.
-  - Go to Settings -> System Setup -> Scroll to the bottom -> Battery measurements. And there set up what batteries you want to see on the MFD, and by what name. Make sure to check out [[https://www.dropbox.com/s/nlvqttx320zyaba/Battery%20Measurements.mov?dl=0|this video, which shows how to configure the batteries to be visible on the MFD]]
-  - For boats; and other applications with DC loads such as lighting and a Battery Monitor installed, make sure to enable the "Has DC system setting". For more information about it; see the [[https://www.victronenergy.com/live/ccgx:start|GX Manual]].
-==== Networking ====
-No special networking settings are necessary. Not on the Garmin; and not on the Victron GX Device.
-The Garmin MFDs run a DHCP server; and the [[https://www.victronenergy.com/live/ccgx:start|GX device]] are by default configured to use DHCP. After plugging in the cable, the Victron icon will show up after 10 to 30 seconds.
-To connect the GX Device to the internet and the [[https://vrm.victronenergy.com|VRM Portal]], while its Ethernet port is already in use to connect to the Garmin, use either WiFi or a GX GSM. [[https://www.victronenergy.com/live/ccgx:start#internet_connectivity|more information]].
-===== Configuring Multiple Battery Monitors =====
-{{youtube>0Mrk5Q4izvg}}
-===== Step by Step =====
-{{:venus-os:garmin-gx_1.jpg?nolink|}}
-{{:venus-os:garmin-gx_2.jpg?nolink|}}
-{{:venus-os:garmin-gx_3.jpg?nolink|}}
-{{:venus-os:garmin-gx_4.jpg?nolink|}}
-{{:venus-os:garmin-gx_5.jpg?nolink|}}
-{{:venus-os:garmin-gx_6.jpg?nolink|}}
+Moved to: https://www.victronenergy.com/media/pg/Cerbo_GX/en/marine-mfd-integration-by-app.html#UUID-1cf0fd18-cd34-92e7-6f08-cfec8fad0eca