Differences

This shows you the differences between two versions of the page.

--- venus-os:mfd-garmin [2020-07-17 11:49] – [2. Compatibility] mvader
+++ venus-os:mfd-garmin [2021-07-30 00:46] – [4.1. GX device settings] guystewart
@@ Line 38: / Line 38: @@
   - Go to //Settings -> Services//, and there enable both //MQTT on LAN (SSL)// and //MQTT on LAN (Plaintext)//.{{:venus-os:venus-html5-mqtt.png?400|}}
-  - Go to //Settings -> System Setup -> Scroll to the bottom -> Marine MFD App configuration//. And there set up what batteries you want to see on the MFD, and by what name. Make sure to check out [[https://www.dropbox.com/s/nlvqttx320zyaba/Battery%20Measurements.mov?dl=0|this video, which shows how to configure the batteries to be visible on the MFD]]. {{:venus-os:venus-html5-batteries1.png?400|}}{{:venus-os:venus-html5-batteries2.png?400|}}
+  - Go to Menu → Settings → System Setup → Battery Measurements. And there set up what batteries you want to see on the MFD, and by what name. Make sure to check out [[https://www.dropbox.com/s/nlvqttx320zyaba/Battery%20Measurements.mov?dl=0|this video, which shows how to configure the batteries to be visible on the MFD]]. {{:venus-os:venus-html5-batteries1.png?400|}}{{:venus-os:venus-html5-batteries2.png?400|}}
   - For boats; and other applications with DC loads such as lighting and a Battery Monitor installed, make sure to enable the "Has DC system setting". For more information about it; see the [[https://www.victronenergy.com/live/ccgx:start|GX Manual]].
@@ Line 66: / Line 66: @@
 ===== 7. NMEA 2000 =====
-The MFD can also be connected to the GX device using NMEA 2000, see [[https://www.victronenergy.com/live/ccgx:start#marine_mfd_integration_by_nmea_2000|NMEA2000 chapter in the main manual]].
+The MFD can also be connected to the Victron system using NMEA 2000, see the [[ve.can:nmea-2000:start|]].
 The MFD can be configured easily to display the data from the GX device. There is no need to change any instance.\\