Differences

This shows you the differences between two versions of the page.

--- venus-os:mfd-garmin [2020-06-22 09:27] – [4.2. Networking] mbosma
+++ venus-os:mfd-garmin [2020-06-25 12:26] – mbosma
@@ Line 53: / Line 53: @@
 {{youtube>0Mrk5Q4izvg}}
 ===== 6. Step by Step =====
@@ Line 63: / Line 62: @@
 {{:venus-os:garmin-gx_6.jpg?nolink|}}
+===== 7. NMEA 2000 =====
+The MFD can also be connected to the GX device using NMEA 2000, see [[https://www.victronenergy.com/live/ccgx:start#marine_mfd_integration_by_nmea_2000|NMEA2000 chapter in the main manual]].
+The MFD can be configured easily to display the data from the GX device. There is no need to change any instance.\\
+To setup NMEA 2000 on the MFD, go to //Settings > Communications > NMEA 2000 Setup > Device List//. Here you can view information about the connected products and change their names. Note that the names are stored on the MFD and not on the NMEA 2000 device.
+The following Victron related PGNs are supported:
+  * 127505 - Fluid level (tanks)
+  * 127506 - DC Detailed Status; State-of-charge, Time-to-go
+  * 127508 - Battery Status; Voltage, current
+The supported PGNs may vary per model. Please consult the manual of the MFD for a list of supported PGNs.