Differences

This shows you the differences between two versions of the page.

--- venus-os:mfd-garmin [2019-11-13 09:59] – mbosma
+++ venus-os:mfd-garmin [2020-02-25 08:45] – [4.1. GX device settings] mbosma
@@ Line 1: / Line 1: @@
 ====== Garmin MFD integration ======
-Preliminary manual
 ===== 1. Introduction =====
@@ Line 9: / Line 8: @@
 ===== 2. Compatibility =====
-OneHelm is currently available for the GPSMAP® 8400/8600 MFD series.
+OneHelm is currently available for the following models:
+  * GPSMAP® 8400/8600 MFD series
+  * GPSMAP® 722/922/1222 Plus MFD series
 Also, Active Captain is supported. This screenshot shows ActiveCaptain, with the Victron App:
@@ Line 28: / Line 29: @@
 ==== 4.1. GX device settings ====
-  - Go to Settings -> Services, and there enable MQTT.
+  - Go to Settings -> Services, and there enable both MQTT on LAN (SSL) and MQTT on LAN (Plaintext).
   - Go to Settings -> System Setup -> Scroll to the bottom -> Battery measurements. And there set up what batteries you want to see on the MFD, and by what name. Make sure to check out [[https://www.dropbox.com/s/nlvqttx320zyaba/Battery%20Measurements.mov?dl=0|this video, which shows how to configure the batteries to be visible on the MFD]]
   - For boats; and other applications with DC loads such as lighting and a Battery Monitor installed, make sure to enable the "Has DC system setting". For more information about it; see the [[https://www.victronenergy.com/live/ccgx:start|GX Manual]].