User Tools

Site Tools


venus-os:mfd-garmin

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
venus-os:mfd-garmin [2019-10-18 13:16]
guy_stewart [Networking]
venus-os:mfd-garmin [2020-07-17 11:49]
mvader [2. Compatibility]
Line 1: Line 1:
 ====== Garmin MFD integration ====== ====== Garmin MFD integration ======
  
-Preliminary manual 
  
-===== Introduction =====+===== 1. Introduction =====
  
 +This document explains how to connect to Garmin MFDs using an Ethernet connection.
 The integration technology used is called [[https://www.garmin.com/en-US/onehelm|Garmin OneHelm]]. The integration technology used is called [[https://www.garmin.com/en-US/onehelm|Garmin OneHelm]].
  
-===== Compatibility =====+Make sure to also study the [[https://www.victronenergy.com/live/ccgx:start#marine_mfd_integration_by_app|Marine MFD Integration by App chapter in the manual]].
  
-OneHelm is currently available for the GPSMAP® 8400/8600 MFD series.+Note that there is an alternative method to connect, which is NMEA2000. See the [[https://www.victronenergy.com/live/ccgx:start#marine_mfd_integration_by_nmea_2000|NMEA2000 chapter in the main manual]].
  
-Also, Active Captain is supported. This screenshot shows ActiveCaptain, with the Victron App:+===== 2. Compatibility ===== 
 + 
 +OneHelm is currently available for the following models: 
 +  * GPSMAP® 8400/8600 MFD series 
 +  * GPSMAP® 722/922/1222 Plus MFD series 
 + 
 +Also, Active Captain is supported. Below screenshot shows ActiveCaptain, with the Victron App
 + 
 +From Victron side, all GX devices (Cerbo GX, CCGX, Venus GX, and so forth) can be used and are compatible. For details on detailed product compatibility with regarding to inverter/chargers and other components, see the [[https://www.victronenergy.com/live/ccgx:start#marine_mfd_integration_by_app|main Marine MFD App chapter in the GX Manual]].
  
 {{:venus-os:garmin_gx.jpeg?nolink&800|}} {{:venus-os:garmin_gx.jpeg?nolink&800|}}
  
-===== Wiring =====+===== 3. Wiring =====
  
 The Garmin needs to be connected to the [[https://www.victronenergy.com/live/venus-os:start|GX device ]] using Ethernet. Its not possible to connect over WiFi. For the ethernet connection, a Garmin adapter is required: The Garmin needs to be connected to the [[https://www.victronenergy.com/live/venus-os:start|GX device ]] using Ethernet. Its not possible to connect over WiFi. For the ethernet connection, a Garmin adapter is required:
Line 24: Line 32:
   * Marine Network Cables - 500ft - PART NUMBER 010-10647-01   * Marine Network Cables - 500ft - PART NUMBER 010-10647-01
  
-===== Configuration ===== 
  
-==== GX device settings ====+===== 4. Configuration ===== 
 + 
 +==== 4.1. GX device settings ====
    
-  - Ordered List Item +  - Go to //Settings -> Services//, and there enable both //MQTT on LAN (SSL)// and //MQTT on LAN (Plaintext)//.{{:venus-os:venus-html5-mqtt.png?400|}} 
-  - Go to Settings -> Services, and there enable MQTT. +  - Go to //Settings -> System Setup -> Scroll to the bottom -> Marine MFD App configuration//. And there set up what batteries you want to see on the MFD, and by what name. Make sure to check out [[https://www.dropbox.com/s/nlvqttx320zyaba/Battery%20Measurements.mov?dl=0|this video, which shows how to configure the batteries to be visible on the MFD]]. {{:venus-os:venus-html5-batteries1.png?400|}}{{:venus-os:venus-html5-batteries2.png?400|}}
-  - Go to Settings -> System Setup -> Scroll to the bottom -> Battery measurements. And there set up what batteries you want to see on the MFD, and by what name. Make sure to check out [[https://www.dropbox.com/s/nlvqttx320zyaba/Battery%20Measurements.mov?dl=0|this video, which shows how to configure the batteries to be visible on the MFD]]+
   - For boats; and other applications with DC loads such as lighting and a Battery Monitor installed, make sure to enable the "Has DC system setting". For more information about it; see the [[https://www.victronenergy.com/live/ccgx:start|GX Manual]].   - For boats; and other applications with DC loads such as lighting and a Battery Monitor installed, make sure to enable the "Has DC system setting". For more information about it; see the [[https://www.victronenergy.com/live/ccgx:start|GX Manual]].
  
-==== Networking ====+==== 4.2. Networking ====
 No special networking settings are necessary. Not on the Garmin; and not on the Victron GX Device. No special networking settings are necessary. Not on the Garmin; and not on the Victron GX Device.
  
 The Garmin MFDs run a DHCP server; and the [[https://www.victronenergy.com/live/ccgx:start|GX device]] are by default configured to use DHCP. After plugging in the cable, the Victron icon will show up after 10 to 30 seconds. The Garmin MFDs run a DHCP server; and the [[https://www.victronenergy.com/live/ccgx:start|GX device]] are by default configured to use DHCP. After plugging in the cable, the Victron icon will show up after 10 to 30 seconds.
  
-It is possible to connect the Garmin MFD to the Ethernet port of the GX deviceand connect to the internet and VRM on the GX device by using [[https://www.victronenergy.com/live/ccgx:start#internet_connectivity| one of the other non-ethernet port internet connectivity options (eg Wifi interface, or GX GSM).]] +To connect the GX Device to the internet and the [[https://vrm.victronenergy.com|VRM Portal]]while its Ethernet port is already in use to connect to the Garmin, use WiFi. [[https://www.victronenergy.com/live/ccgx:start#internet_connectivity|more information]].
  
-===== Usage =====+:!: Connecting a Garmin MFD to a network router over Ethernet leads to IP address conflicts, due to the integrated DHCP server.  
 + 
 +:!: It is not possible to use a [[https://www.victronenergy.com/accessories/gx-gsm|GX GSM]], due to the integrated DHCP server of the Garmin MFD. 
 + 
 +===== 5. Configuring Multiple Battery Monitors =====
  
 {{youtube>0Mrk5Q4izvg}} {{youtube>0Mrk5Q4izvg}}
  
 +===== 6. Step by Step =====
 +{{:venus-os:garmin-gx_1.jpg?nolink|}}
 +{{:venus-os:garmin-gx_2.jpg?nolink|}}
 +{{:venus-os:garmin-gx_3.jpg?nolink|}}
 +{{:venus-os:garmin-gx_4.jpg?nolink|}}
 +{{:venus-os:garmin-gx_5.jpg?nolink|}}
 +{{:venus-os:garmin-gx_6.jpg?nolink|}}
 +
 +===== 7. NMEA 2000 =====
 +
 +The MFD can also be connected to the GX device using NMEA 2000, see [[https://www.victronenergy.com/live/ccgx:start#marine_mfd_integration_by_nmea_2000|NMEA2000 chapter in the main manual]].
 +
 +The MFD can be configured easily to display the data from the GX device. There is no need to change any instance.\\
 +To setup NMEA 2000 on the MFD, go to //Settings > Communications > NMEA 2000 Setup > Device List//. Here you can view information about the connected products and change their names. Note that the names are stored on the MFD and not on the NMEA 2000 device.
 +
 +The following Victron related PGNs are supported:
 +  * 127505 - Fluid level (tanks)
 +  * 127506 - DC Detailed Status; State-of-charge, Time-to-go
 +  * 127508 - Battery Status; Voltage, current
  
 +The supported PGNs may vary per model. Please consult the manual of the MFD for a list of supported PGNs.
  
-TBD add screenshots and so forth. 
venus-os/mfd-garmin.txt · Last modified: 2021-03-15 23:52 by mvader