Differences

This shows you the differences between two versions of the page.

--- venus-os:mfd-garmin [2019-03-19 00:11] – [1. Introduction] mvader
+++ venus-os:mfd-garmin [2019-04-16 16:23] – mvader
@@ Line 1: / Line 1: @@
-====== Garmin MFD integration =======
+moved to: https://docs.victronenergy.com/gx/mfd-garmin.html
-===== 1. Introduction =====
-The integration technology used is called Garmin OneHelm.
-https://www.garmin.com/en-US/onehelm
-===== 2. Compatibility =====
-OneHelm is currently available for the GPSMAP® 8400/8600 MFD series.
-===== 3. Wiring =====
-The Garmin needs to be connected to the Venus-device using Ethernet. Its not possible to connect over WiFi. For the ethernet connection, a Garmin adapter is required:
-  - Marine Network Cables - 6ft - PART NUMBER 010-10550-00
-  - Marine Network Cables - 20ft - PART NUMBER 010-10551-00
-  - Marine Network Cables - 40ft - PART NUMBER 010-10552-00
-  - Marine Network Cables - 500ft - PART NUMBER 010-10647-01
-===== 4. Configuration =====
-=== Venus-device settings ===
-   - Go to Settings -> Services, and there enable MQTT.
-   - Go to Settings -> System Setup -> Scroll to the bottom -> Battery measurements. And there set up what batteries you want to see on the MFD; and by what name.
-=== Networking ===
-No settings are necessary. The Garmin MFDs run a DHCP server; and the Venus-devices are by default configured to use DHCP. After plugging in the cable, the Victron icon will show up after 10 to 30 seconds.
-How to connect to both a Garmin and Internet? That is unclear as of now.
-===== 5. Usage =====
-TBD add screenshots and so forth.