Differences

This shows you the differences between two versions of the page.

--- venus-os:mfd-garmin [2019-02-21 13:05] – mvader
+++ venus-os:mfd-garmin [2019-03-19 00:11] – [1. Introduction] mvader
@@ Line 1: / Line 1: @@
-====== MFD Garmin =======
+====== Garmin MFD integration =======
-Garmin themselves calls this technology OneHelm.
+===== 1. Introduction =====
+The integration technology used is called Garmin OneHelm.
 https://www.garmin.com/en-US/onehelm
-==== Comptibility ====
+===== 2. Compatibility =====
 OneHelm is currently available for the GPSMAP® 8400/8600 MFD series.
-==== Wiring ====
+===== 3. Wiring =====
-an adapter is necessary:
+The Garmin needs to be connected to the Venus-device using Ethernet. Its not possible to connect over WiFi. For the ethernet connection, a Garmin adapter is required:
   - Marine Network Cables - 6ft - PART NUMBER 010-10550-00
@@ Line 18: / Line 19: @@
   - Marine Network Cables - 500ft - PART NUMBER 010-10647-01
-==== Networking ====
+===== 4. Configuration =====
-Needs to be done with ethernet. Not wifi.
+=== Venus-device settings ===
- (DHCP server op de Garmin)
+   - Go to Settings -> Services, and there enable MQTT.
+   - Go to Settings -> System Setup -> Scroll to the bottom -> Battery measurements. And there set up what batteries you want to see on the MFD; and by what name.
+=== Networking ===
+No settings are necessary. The Garmin MFDs run a DHCP server; and the Venus-devices are by default configured to use DHCP. After plugging in the cable, the Victron icon will show up after 10 to 30 seconds.
-==== Usage ====
+How to connect to both a Garmin and Internet? That is unclear as of now.
+===== 5. Usage =====
-Screenshots
+TBD add screenshots and so forth.