Differences

This shows you the differences between two versions of the page.

--- venus-os:mfd-garmin [2019-02-01 15:02] – created mvader
+++ venus-os:mfd-garmin [2021-03-15 23:52] – [7. NMEA 2000] mvader
@@ Line 1: / Line 1: @@
-====== MFD Garmin =======
+====== Garmin MFD integration ======
-Wiring: no special cable is required, the Garmin is a normal Ethernet socket. use a standard RJ-45 LAN cable. For proper wiring, including pull relief; an adapter is necessary (TBD).
+===== 1. Introduction =====
-Networking  (DHCP server op de Garmin)
+This document explains how to connect to Garmin MFDs using an Ethernet connection.
+The integration technology used is called [[https://www.garmin.com/en-US/onehelm|Garmin OneHelm]].
+Make sure to also study the [[https://www.victronenergy.com/live/ccgx:start#marine_mfd_integration_by_app|Marine MFD Integration by App chapter in the manual]].
-Usage
+Note that there is an alternative method to connect, which is NMEA2000. See the [[https://www.victronenergy.com/live/ccgx:start#marine_mfd_integration_by_nmea_2000|NMEA2000 chapter in the main manual]].
+===== 2. Compatibility =====
+OneHelm is currently available for the following models:
+  * GPSMAP® 8400/8600 MFD series
+  * GPSMAP® 722/922/1222 Plus MFD series
+Also, Active Captain is supported. Below screenshot shows ActiveCaptain, with the Victron App.
+From Victron side, all GX devices (Cerbo GX, CCGX, Venus GX, and so forth) can be used and are compatible. For details on detailed product compatibility with regarding to inverter/chargers and other components, see the [[https://www.victronenergy.com/live/ccgx:start#marine_mfd_integration_by_app|main Marine MFD App chapter in the GX Manual]].
+{{:venus-os:garmin_gx.jpeg?nolink&800|}}
+===== 3. Wiring =====
+The Garmin needs to be connected to the [[https://www.victronenergy.com/live/venus-os:start|GX device ]] using Ethernet. Its not possible to connect over WiFi. For the ethernet connection, a Garmin adapter is required:
+  * Marine Network Cables - 6ft - PART NUMBER 010-10550-00
+  * Marine Network Cables - 20ft - PART NUMBER 010-10551-00
+  * Marine Network Cables - 40ft - PART NUMBER 010-10552-00
+  * Marine Network Cables - 500ft - PART NUMBER 010-10647-01
+===== 4. Configuration =====
+==== 4.1. GX device settings ====
+  - Go to //Settings -> Services//, and there enable both //MQTT on LAN (SSL)// and //MQTT on LAN (Plaintext)//.{{:venus-os:venus-html5-mqtt.png?400|}}
+  - Go to //Settings -> System Setup -> Scroll to the bottom -> Marine MFD App configuration//. And there set up what batteries you want to see on the MFD, and by what name. Make sure to check out [[https://www.dropbox.com/s/nlvqttx320zyaba/Battery%20Measurements.mov?dl=0|this video, which shows how to configure the batteries to be visible on the MFD]]. {{:venus-os:venus-html5-batteries1.png?400|}}{{:venus-os:venus-html5-batteries2.png?400|}}
+  - For boats; and other applications with DC loads such as lighting and a Battery Monitor installed, make sure to enable the "Has DC system setting". For more information about it; see the [[https://www.victronenergy.com/live/ccgx:start|GX Manual]].
+==== 4.2. Networking ====
+No special networking settings are necessary. Not on the Garmin; and not on the Victron GX Device.
+The Garmin MFDs run a DHCP server; and the [[https://www.victronenergy.com/live/ccgx:start|GX device]] are by default configured to use DHCP. After plugging in the cable, the Victron icon will show up after 10 to 30 seconds.
+To connect the GX Device to the internet and the [[https://vrm.victronenergy.com|VRM Portal]], while its Ethernet port is already in use to connect to the Garmin, use WiFi. [[https://www.victronenergy.com/live/ccgx:start#internet_connectivity|more information]].
+:!: Connecting a Garmin MFD to a network router over Ethernet leads to IP address conflicts, due to the integrated DHCP server.
+:!: It is not possible to use a [[https://www.victronenergy.com/accessories/gx-gsm|GX GSM]], due to the integrated DHCP server of the Garmin MFD.
+===== 5. Configuring Multiple Battery Monitors =====
+{{youtube>0Mrk5Q4izvg}}
+===== 6. Step by Step =====
+{{:venus-os:garmin-gx_1.jpg?nolink|}}
+{{:venus-os:garmin-gx_2.jpg?nolink|}}
+{{:venus-os:garmin-gx_3.jpg?nolink|}}
+{{:venus-os:garmin-gx_4.jpg?nolink|}}
+{{:venus-os:garmin-gx_5.jpg?nolink|}}
+{{:venus-os:garmin-gx_6.jpg?nolink|}}
+===== 7. NMEA 2000 =====
+The MFD can also be connected to the Victron system using NMEA 2000, see the [[ve.can:nmea-2000:start|]].
+The MFD can be configured easily to display the data from the GX device. There is no need to change any instance.\\
+To setup NMEA 2000 on the MFD, go to //Settings > Communications > NMEA 2000 Setup > Device List//. Here you can view information about the connected products and change their names. Note that the names are stored on the MFD and not on the NMEA 2000 device.
+The following Victron related PGNs are supported:
+  * 127505 - Fluid level (tanks)
+  * 127506 - DC Detailed Status; State-of-charge, Time-to-go
+  * 127508 - Battery Status; Voltage, current
+The supported PGNs may vary per model. Please consult the manual of the MFD for a list of supported PGNs.
-Screenshots