Differences

This shows you the differences between two versions of the page.

--- venus-os:mfd-furuno [2020-07-20 09:35] – [6. NMEA 2000] mbosma
+++ venus-os:mfd-furuno [2020-07-28 12:40] – [2. Compatibility] mvader
@@ Line 11: / Line 11: @@
 ===== 2. Compatibility =====
-The MFD integration is compatible with the following models:
+The MFD integration is compatible with the following Furuno MFDs:
   * NavNet TZtouch3 TZT12F
   * NavNet TZtouch3 TZT16F
   * NavNet TZtouch3 TZT19F
   * Navnet TZtouch2 TZT2BB Black box
-NavNet TZtouch3 MFDs need at least software version v1.08. The Navnet TZtouch2 TZT2BB needs at least software version v7.
+NavNet TZtouch3 MFDs need at least software version v1.08. The Navnet TZtouch2 TZT2BB needs at least software version v7.01.
 Note that the Navnet TZtouch2 TZT**L** models are **not** supported.
@@ Line 38: / Line 38: @@
 {{:venus-os:furuno-ip-config.png?400|}}
-It is possible to connect a router to the same LAN; and that way connect the GX Device to the internet. Make sure the //Gateway// and //DNS Server// settings of the GX are set to the IP address of the router.
+It is possible to connect a router to the same LAN; and that way connect the GX Device to the internet. Make sure the //Gateway// and //DNS Server// settings of the GX are set to the IP address of the router, and that the router has its LAN IP addressing configured in the same subnet.
 :!: It is not possible to use a [[https://www.victronenergy.com/accessories/gx-gsm|GX GSM]].