venus-os:mfd-furuno
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
venus-os:mfd-furuno [2020-06-11 17:17] – [1. Introduction] mbosma | venus-os:mfd-furuno [2020-07-17 11:50] – [2. Compatibility] mvader | ||
---|---|---|---|
Line 19: | Line 19: | ||
Note that the Navnet TZtouch2 TZT**L** models are **not** supported. | Note that the Navnet TZtouch2 TZT**L** models are **not** supported. | ||
+ | |||
+ | From Victron side, all GX devices (Cerbo GX, CCGX, Venus GX, and so forth) can be used and are compatible. For details on detailed product compatibility with regarding to inverter/ | ||
===== 3. Wiring ===== | ===== 3. Wiring ===== | ||
Line 38: | Line 40: | ||
It is possible to connect a router to the same LAN; and that way connect the GX Device to the internet. Make sure the //Gateway// and //DNS Server// settings of the GX are set to the IP address of the router. | It is possible to connect a router to the same LAN; and that way connect the GX Device to the internet. Make sure the //Gateway// and //DNS Server// settings of the GX are set to the IP address of the router. | ||
+ | :!: It is not possible to use a [[https:// | ||
==== 4.2 Services configuration ==== | ==== 4.2 Services configuration ==== | ||
On the Victron GX Device, go to //Settings -> Services//, and there enable both //MQTT on LAN (SSL)// and //MQTT on LAN (Plaintext)// | On the Victron GX Device, go to //Settings -> Services//, and there enable both //MQTT on LAN (SSL)// and //MQTT on LAN (Plaintext)// | ||
Line 50: | Line 53: | ||
{{youtube> | {{youtube> | ||
+ | |||
+ | ===== 6. NMEA 2000 ===== | ||
+ | |||
+ | The MFD can also be connected to the GX device using NMEA 2000, see [[https:// | ||
+ | |||
+ | The MFD can be configured easily to display the data from the GX device. There is no need to change any instance. | ||
+ | To view NMEA 2000 devices on the MFD, go to //Settings > Initial Setup > Data Aquisition > Sensor List//. Here you can view basic information and change device instances and custom names. | ||
+ | |||
+ | The following Victron PGNs are supported: | ||
+ | * 127505 - Fluid level (tanks) | ||
+ | * 127506 - DC Detailed Status (limited support); State-of-charge, | ||
+ | * 127508 - Battery Status (limited support); Voltage, Current |
venus-os/mfd-furuno.txt · Last modified: 2023-06-22 19:27 by sloges