venus-os:mfd-furuno
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
venus-os:mfd-furuno [2020-06-11 17:00] – [4.1 Ethernet configuration] mvader | venus-os:mfd-furuno [2020-06-25 17:07] – [4.1 Ethernet configuration] mbosma | ||
---|---|---|---|
Line 6: | Line 6: | ||
Make sure to also study the [[https:// | Make sure to also study the [[https:// | ||
+ | |||
+ | Note that there is an alternative method to connect, which is NMEA2000. See the [[https:// | ||
===== 2. Compatibility ===== | ===== 2. Compatibility ===== | ||
Line 36: | Line 38: | ||
It is possible to connect a router to the same LAN; and that way connect the GX Device to the internet. Make sure the //Gateway// and //DNS Server// settings of the GX are set to the IP address of the router. | It is possible to connect a router to the same LAN; and that way connect the GX Device to the internet. Make sure the //Gateway// and //DNS Server// settings of the GX are set to the IP address of the router. | ||
+ | :!: It is not possible to use a [[https:// | ||
==== 4.2 Services configuration ==== | ==== 4.2 Services configuration ==== | ||
On the Victron GX Device, go to //Settings -> Services//, and there enable both //MQTT on LAN (SSL)// and //MQTT on LAN (Plaintext)// | On the Victron GX Device, go to //Settings -> Services//, and there enable both //MQTT on LAN (SSL)// and //MQTT on LAN (Plaintext)// | ||
Line 48: | Line 51: | ||
{{youtube> | {{youtube> | ||
+ | |||
+ | ===== 6. NMEA 2000 ===== | ||
+ | |||
+ | The MFD can also be connected to the GX device using NMEA 2000, see [[https:// | ||
+ | |||
+ | The MFD can be configured easily to display the data from the GX device. There is no need to change any instance. | ||
+ | To view NMEA 2000 devices on the MFD, go to //Settings > Initial Setup > Data Aquisition > Sensor List//. Here you can view basic information and change device instances and custom names. | ||
+ | |||
+ | The following Victron PGNs are supported: | ||
+ | * 127505 - Fluid level (tanks) | ||
+ | * 127506 - DC Detailed Status (limited support); State-of-charge, | ||
+ | * 127508 - Battery Status (limited support); Voltage, Current |
venus-os/mfd-furuno.txt · Last modified: 2023-06-22 19:27 by sloges