Differences

This shows you the differences between two versions of the page.

--- venus-os:mfd-furuno [2020-06-11 17:00] – [4.1 Ethernet configuration] mvader
+++ venus-os:mfd-furuno [2020-06-25 15:36] – [6. NMEA 2000] mbosma
@@ Line 6: / Line 6: @@
 Make sure to also study the [[https://www.victronenergy.com/live/ccgx:start#marine_mfd_integration_by_app|Marine MFD Integration by App chapter in the manual]].
+Note that there is an alternative method to connect, which is NMEA2000. See the [[https://www.victronenergy.com/live/ccgx:start#marine_mfd_integration_by_nmea_2000|NMEA2000 chapter in the main manual]]. Currently Furuno MFDs only have support for fluid level PGNs sent out by Victron equipment.
 ===== 2. Compatibility =====
@@ Line 48: / Line 50: @@
 {{youtube>0Mrk5Q4izvg}}
+===== 6. NMEA 2000 =====
+The MFD can also be connected to the GX device using NMEA 2000, see [[https://www.victronenergy.com/live/ccgx:start#marine_mfd_integration_by_nmea_2000|NMEA2000 chapter in the main manual]]. However, there is only limited support for NMEA 2000 PGNs sent from Victron equipment.
+The MFD can be configured easily to display the data from the GX device. There is no need to change any instance.
+To view NMEA 2000 devices on the MFD, go to //Settings > Initial Setup > Data Aquisition > Sensor List//. Here you can view basic information and change device instances and custom names.
+The following Victron PGNs are supported:
+  * 127505 - Fluid level (tanks)
+  * 127506 - DC Detailed Status (limited support); State-of-charge, Time-to-go
+  * 127508 - Battery Status (limited support); Voltage, Current