Differences

This shows you the differences between two versions of the page.

--- venus-os:large [2021-11-25 14:46] – [1.1 Venus OS Large, Node-RED and Signal K server?] dfaber
+++ venus-os:large [2021-11-26 12:07] – [5.1 Introduction] dfaber
@@ Line 13: / Line 13: @@
 From VRM, a connection to Node-RED, the Node-RED dashboard and Signal K can be made.
-{{ :venus-os:large-proxy.png?600 |}}
+{{ :venus-os:large-proxy.png?1024 |}}
 Note that only the services that are enabled are shown in the VRM menu.
@@ Line 122: / Line 122: @@
 Also Node-RED features a [[https://flows.nodered.org/node/node-red-dashboard|fully customisable dashboard]], viewable in a webbrowser - both locally but also remotely, via the VRM Servers.
-A good tutorial on how to work with Node-RED is here: https://nodered.org/docs/tutorials/first-flow.
+A good tutorial on how to work with Node-RED is here: https://nodered.org/docs/tutorials/first-flow. On https://github.com/victronenergy/node-red-contrib-victron/wiki/Example-Flows you can find example flows that use the Victron Energy nodes.
-The Node-RED editor is at http://venus.local:1880/. For some systems, you'll have to replace ''venus.local'' by the ip-address.
+The Node-RED editor can be accessed from your LAN at http://venus.local:1880/. For some systems, you'll have to replace ''venus.local'' by the ip-address. You can also access the Node-RED editor from VRM, where it is available via the //Venus OS Large// menu.
-Please note that updating the ''@victronenergy/node-red-contrib-victron'' module is not (yet) possible from either the Node-RED UI as the commandline. The recommended way to get to the new node-red-contrib-victron version is to await a new Venus OS large build.
+Please note that updating the ''@victronenergy/node-red-contrib-victron'' module is not possible from either the Node-RED editor as the commandline. The recommended way to get to the new node-red-contrib-victron version is to await a new Venus OS large build.
 ==== 5.2 Installing extra nodes ====