venus-os:extended
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | Next revisionBoth sides next revision | ||
venus-os:extended [2020-05-30 06:29] – [4. Node-RED] mvader | venus-os:extended [2020-06-17 00:11] – [Appendix A - Repartitioning Venus GX flash memory] mvader | ||
---|---|---|---|
Line 247: | Line 247: | ||
The Venus GX has sufficient flash memory to run the Venus OS Extended image. But up until end of 2018 it was produced with a partition layout not suitable to run large versions of Venus OS. This appendix explains how to self update the partitions to the new format. | The Venus GX has sufficient flash memory to run the Venus OS Extended image. But up until end of 2018 it was produced with a partition layout not suitable to run large versions of Venus OS. This appendix explains how to self update the partitions to the new format. | ||
- | Perform this procedure only when connected via Ethernet. Do not use the built-in WiFi AP to performing this procedure. The AP will not work half way the procedure. | + | |
+ | Perform this procedure only when connected via Ethernet | ||
+ | |||
+ | Do not use the built-in WiFi AP to performing this procedure. The AP will not work half way the procedure. Similarly, any WiFi (client-) configuration will be wiped after running the installer. Therefore, as said, make sure to be able to connect on the LAN port before starting this procedure. | ||
**WARNING**: | **WARNING**: | ||
Line 313: | Line 316: | ||
Side info: see here for more details on installing an image. | Side info: see here for more details on installing an image. | ||
- | Once done, reboot the device, | + | Once done, reboot the device. |
+ | |||
+ | After the boot (30 to 60 seconds) the LED will be slow blinking green. Indicating that the WiFi access point is off (as expected). More information about the LED operation is in the Venus GX manual. | ||
+ | Now, re-obtain yourself root access to continue. Note that all settings will be wiped by the installer: | ||
+ | |||
+ | * you'll need to go to Remote Console on LAN, then change access level again, enable ssh, change root password, and then login. | ||
+ | * As warned above, you’ll need to do this on the LAN port. The built-in WiFi access-point will be disabled, and any previously configured WiFi (client-) configuration will be lost as the installer will have wiped all settings. | ||
=== Step D. Restore the files === | === Step D. Restore the files === | ||
Line 326: | Line 335: | ||
ssh 192.168.178.122 reboot | ssh 192.168.178.122 reboot | ||
</ | </ | ||
+ | |||
+ | Once completed, the WiFi access point will be operational again. | ||
=== Step E. Install extended Venus OS === | === Step E. Install extended Venus OS === | ||
Now, the Venus GX has been repartitioned, | Now, the Venus GX has been repartitioned, |
venus-os/extended.txt · Last modified: 2021-01-06 22:04 by mvader