Differences

This shows you the differences between two versions of the page.

--- ve.direct:ve.direct_to_bluetooth_smart_dongle [2018-03-16 15:57] – [Manual - VE.Direct to Bluetooth Smart dongle] mvader
+++ ve.direct:ve.direct_to_bluetooth_smart_dongle [2021-01-19 10:17] – mkuiken
@@ Line 46: / Line 46: @@
 ^ Blue LED       ^ Red LED          ^ Dongle state      ^ Connection State ^ Remark  ^
-| On             | On               | VE.Direct gateway | Disabled         | VE.Direct communication problem. \\ The dongle will not advertise itself so \\ it will not be visible in VictronConnect. |
+| Slow blinking  | Slow blinking    | VE.Direct gateway | Not connected    | VE.Direct communication problem. \\ The dongle will only advertise itself and the \\ attached device will not be visible in VictronConnect. |
+| On             | On               | VE.Direct gateway | Connected        | VE.Direct communication problem. \\ Only the dongle itself can be updated in \\ VictronConnect. |
 | Slow blinking  | Off              | VE.Direct gateway | Not connected    |         |
 | On             | Off              | VE.Direct gateway | Connected        |         |
-| Double flash   | Double flash     | VE.Direct gateway | Clearing pin     |         |
+| Double flash   | Double flash     | VE.Direct gateway | Not connected    | Confirm pin has been cleared        |
 | Fast blinking  | Fast blinking    | Firmware update   | Not connected    | Red and Blue LED Alternating  |
 | On             | Slow blinking    | Firmware update   | Connected        |         |
-| On             | Faster blinking  | Firmware update   | Uploading        |         |
+| On             | Fast blinking    | Firmware update   | Programming      |         |
-| Fast blinking  | Off              | Firmware update   | Programming      |         |
 ==== Troubleshooting ====
@@ Line 97: / Line 97: @@
 The length of the VE.Direct cable is 1.5m
-===== DISQUS Comments =====
+===== DISQUS =====
 ~~DISQUS~~