Differences

This shows you the differences between two versions of the page.

--- ve.can:updating_firmware [2016-06-14 23:34] – [Instructions] mvader
+++ ve.can:updating_firmware [2017-12-05 10:47] – mvader
@@ Line 1: / Line 1: @@
-====== Updating firmware of a VE.Can product ======
+this page has moved [[ccgx:ccgx_ve_power_setup|here]]
-Products which can be updated via its VE.Can port are:
-  * BlueSolar Charger 150/70 VE.Can
-  * BlueSolar Charger 150/85 VE.Can
-  * Lynx Shunt VE.Can
-  * All four Skylla-i Battery Chargers
-  * Skylla-i Remote Control Panel
-  * All our different VE.Can to VE.Bus/VE.Direct and NMEA2000 to VE.Bus/VE.Direct interfaces
-  * Ion Control
-Products with a VE.Can port that need to be updated differently are:
-  * Lynx Ion (update via USB port instead)
-  * Lynx Ion + Shunt (update via USB port instead)
-  * VE.Can tank sender adapter (no updates available)
-  * Color Control GX (update via internet or with an [[ccgx:firmware_updating|sdcard]])
-===== Instructions =====
-There are two ways to update the firmware via the VE.Can port:
-  - Product connected locally to the laptop. Requires the CANUSB adapter, ASS030532000.
-  - Product connect remotely, to a Color Control GX: [[ccgx:ccgx_ve_power_setup#remote_firmware_update|Remote firmware update instructions]]
-That last option is often the easiest way, as there is no other use to the CANUSB and it is quite expensive.
-Steps:
-  - Download VE Power Setup from our download page, and install it
-  - Obtain the necessary firmware file on [[https://professional.victonenergy.com]]|the Victron Professional portal]].
-  - Follow instructions in VE Power Setup.
-  - When having issues, make sure to check the information behind the ''Need help connecting?'' button in the application, as well as the [[:ve_power_setup|this trouble shooting guide]].