Differences

This shows you the differences between two versions of the page.

--- ve.can:updating_firmware [2016-06-14 23:24] – created mvader
+++ ve.can:updating_firmware [2016-06-14 23:34] – [Instructions] mvader
@@ Line 4: / Line 4: @@
   * BlueSolar Charger 150/70 VE.Can
   * BlueSolar Charger 150/85 VE.Can
-  * VE.Bus to VE.Can interface cable
   * Lynx Shunt VE.Can
+  * All four Skylla-i Battery Chargers
+  * Skylla-i Remote Control Panel
+  * All our different VE.Can to VE.Bus/VE.Direct and NMEA2000 to VE.Bus/VE.Direct interfaces
+  * Ion Control
 Products with a VE.Can port that need to be updated differently are:
@@ Line 17: / Line 20: @@
 There are two ways to update the firmware via the VE.Can port:
-  - Product connected locally to the laptop. Requires the CANUSB adapter, ASS ... .
+  - Product connected locally to the laptop. Requires the CANUSB adapter, ASS030532000.
-  - Product connect remotely, to a Color Control GX: [[ccgx:ccgx_ve_power_setup|Remote firmware update instructions]]
+  - Product connect remotely, to a Color Control GX: [[ccgx:ccgx_ve_power_setup#remote_firmware_update|Remote firmware update instructions]]
+That last option is often the easiest way, as there is no other use to the CANUSB and it is quite expensive.
+Steps:
+  - Download VE Power Setup from our download page, and install it
+  - Obtain the necessary firmware file on [[https://professional.victonenergy.com]]|the Victron Professional portal]].
+  - Follow instructions in VE Power Setup.
+  - When having issues, make sure to check the information behind the ''Need help connecting?'' button in the application, as well as the [[:ve_power_setup|this trouble shooting guide]].