User Tools

Site Tools


ve.bus:ve.bus_error_codes

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
ve.bus:ve.bus_error_codes [2019-06-24 03:05]
simonhackett [Error 3 - Not all, or more than, the expected devices were found in the system]
ve.bus:ve.bus_error_codes [2019-06-24 08:08] (current)
mvader [Error 3 - Not all, or more than, the expected devices were found in the system]
Line 41: Line 41:
   - Communication cable error: Check the communication cables. Make sure to use commercial patch leads and not hand-crimped cables - VE.Bus cabling is very sensitive to physical wiring faults.   - Communication cable error: Check the communication cables. Make sure to use commercial patch leads and not hand-crimped cables - VE.Bus cabling is very sensitive to physical wiring faults.
   - DC fuse blown of one or more units in the system: When mains is available all units seems to work correctly, but as soon as mains fails, or as soon as the system decides to switch to Island mode for any other reason, the non powered units are disconnected from the system.   - DC fuse blown of one or more units in the system: When mains is available all units seems to work correctly, but as soon as mains fails, or as soon as the system decides to switch to Island mode for any other reason, the non powered units are disconnected from the system.
-  - Devices that are '​switched off' but still physically connected to the VE.Bus chain: Multi/​Quattro units that are switched off (on the front panel rocker switch) but that are still physically wired into the VE.Bus and connected to power can trigger this error. An example scenario is a cluster of (say) six units where one has had a hardware fault, and where you have switched 3 units off and set up a temporary smaller cluster of the other 3 units until the hardware fault is fixed. The units that are switched off must also be removed (un-patched) from the VE.Bus daisy chain or they can trigger this fault when under load.+
   ​   ​
 ==== Error 4 - No other device found ==== ==== Error 4 - No other device found ====
ve.bus/ve.bus_error_codes.txt · Last modified: 2019-06-24 08:08 by mvader