Differences

This shows you the differences between two versions of the page.

--- ve.bus:manual_parallel_and_three_phase_systems [2019-10-27 02:23] – [A continuous, unbroken negative link must be maintained between all units] guystewart
+++ ve.bus:manual_parallel_and_three_phase_systems [2019-11-27 12:27] – guy_stewart
@@ Line 17: / Line 17: @@
 This should be considered essential before attempting design or installation.
-First get experience with smaller systems. Start with single phase single unit, so that you are already familiar with the necessary equipment and software required.
+First get experience with smaller systems. If you are new to Victron, please start with simpler designs, so that you become familiar with the necessary training, equipment and software required.
 It is also recommended to hire an installer that has experience with these more complex Victron systems, for both the design and the commissioning.
@@ Line 131: / Line 131: @@
 It is strongly recommended that a [[venus-os:start|GX Family Product]] is used in conjunction with these larger systems. They provide highly valuable information on the history and performance of the system. System notifications are clearly presented and [[https://www.victronenergy.com/panel-systems-remote-monitoring/color-control|many additional functions]] are enabled.
 Data from [[http://vrm.victronenergy.com|VRM]] will greatly speed support if it is required.
+===== Training Video =====
+There is an advanced training video and competency exam for 3 phase and parallel installation and commissioning available on [[https://professional.victronenergy.com|Victron Professional -> E-Learning.]] You will require an installer account on Victron Professional to access it.
 ===== DISQUS =====
 ~~DISQUS~~