User Tools

Site Tools


ve.bus:grid-codes-and-loss-of-mains-detection

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
ve.bus:grid-codes-and-loss-of-mains-detection [2019-01-21 11:12]
ictbeheer [DISQUS]
ve.bus:grid-codes-and-loss-of-mains-detection [2019-09-13 15:50] (current)
marmour [How does LOM detection relate to overload shutdowns?]
Line 20: Line 20:
 ==== How does LOM detection relate to overload shutdowns? ==== ==== How does LOM detection relate to overload shutdowns? ====
  
-To detect a loss of mains, the inverter/​charger will constantly try to shift the AC frequency. When connected to a stable grid, with a normal accepted impedance, it will not be possible to do so, and it can therefor ​detect that the mains is still present. In case the mains was lost, the inverter/​charger will be able to shift the frequency at will, without any resulting correction currents.+To detect a loss of mains, the inverter/​charger will constantly try to shift the AC frequency. When connected to a stable grid, with a normal accepted impedance, it will not be possible to do so, and it can therefore ​detect that the mains is still present. In case the mains was lost, the inverter/​charger will be able to shift the frequency at will, without any resulting correction currents.
  
 When connected to a generator, or to a grid with a long extension cable or long ‘last mile’ cable, the pushing and pulling on the grid does create high currents, and as a result the inverter/​charger algorithm can become unstable and switch itself off in overload. When connected to a generator, or to a grid with a long extension cable or long ‘last mile’ cable, the pushing and pulling on the grid does create high currents, and as a result the inverter/​charger algorithm can become unstable and switch itself off in overload.
Line 83: Line 83:
 A: Yes, also in this case LOM is required to make for a safe and also local regulations compliant system. Running ESS with disabled-feed-back is still not the same as using a Multi in its default configuration without ESS.  A: Yes, also in this case LOM is required to make for a safe and also local regulations compliant system. Running ESS with disabled-feed-back is still not the same as using a Multi in its default configuration without ESS. 
  
 +
 +===== DISQUS =====
 +~~DISQUS~~
  
ve.bus/grid-codes-and-loss-of-mains-detection.1548065538.txt.gz · Last modified: 2019-01-21 11:12 by ictbeheer