rters and Quattros must be loaded with 2xx or 3xx firmware in order to get the Assistants tab. Note that running these firmware versions disables the use of the Virtual switch t... irtual switch tab.
More information about which firmware type to choose for an installation, and the updat... .victronenergy.com/upload/documents/manual-VE.Bus-firmware-versions-explained-EN.pdf|VE.Bus firmware version
rs and Quattros must be loaded with a a different firmware first. More information about which firmware type to choose for an installation, and the updating instructi... .victronenergy.com/upload/documents/manual-VE.Bus-firmware-versions-explained-EN.pdf|VE.Bus firmware versions explained]].
==== Step by step instructions ====
Open
haviour for a charger and is normally done in the firmware. The HUB2v2 assistant does this because in the 2xx firmware the charge engine is stopped when the Multi is in
hich has the new-type microprocessor (the 7 digit firmware numbers starts with 26 or 27, instead of 19 or 20... ros with the old-type microprocessor (the 7 digit firmware numbers starts with 19 or 20, instead of 26 or 27
2785e57.png?direct&150 }}
Deprecated: per VE.Bus firmware version 489, this Assistant is no longer required... ith VE.Bus BMS, our advice is to first update the firmware of the inverter, using VictronConnect, and therea
complicated than usual, is only necessary on 2xx firmware. On new firmware (4xx), this is all done automatically behind the scenes.
===== Step by step instructions
