Differences

This shows you the differences between two versions of the page.

--- playground:playground [2015-10-16 13:25] – arnekaas
+++ playground:playground [2024-02-09 09:30] (current) – created - external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-start with a smile every day: =)
+====== PlayGround ======
-Then have a cup of tea: 8-)
-creat a list:
-  - 1234
-  - 5678
-  - 910
-**keep on playing...**
-A new topic by Arne Kaas: "Creating a redundant and low-stand-by system"
-----
-Hi Mathijs and Johannes,
-I've got some questions on how to make a 3 phase system redundant and more efficient by reducing stand-by power.
-**Redundancy**: Can I install a 3 phase system with 6 quatro's/multies that will remain on, even if one of the six inverters will fail? Is it possible to connected 2 x a 3phase system with master and slave, where the slave will automatically become a master if the real master (3 fase system) fails?
-**Less standby power**:
-Looking at the standby power of a 3 fase system with 6 quatro's/multi's. It is possible to 'sleep' the second 3phase system at lower powers?
-//With aux-relais and a power assistant I've already done this on Pampus, but this was complicated to setup and uses a lot op stand-by power. And if one of the six quatro's fail, I will still have a black-out.
-//
-Looking at the standby power of a 3 fase system with 3 quatro's/multi's. It is possible to 'sleep' 1 or 2 of three fase setup at lower powers or time windows? Like in the 'Nullust in Search modus (W)'?