Differences

This shows you the differences between two versions of the page.

--- open_source:ccgx:commandline [2019-04-15 21:10] – [5. VE.Direct products] mvader
+++ open_source:ccgx:commandline [2019-06-22 15:25] – [1. Introduction] mvader
@@ Line 1: / Line 1: @@
-====== Venus command-line manual ======
+====== Venus OS operational commandline manual ======
 ===== 1. Introduction =====
@@ Line 5: / Line 5: @@
 This page explains how to change settings and/or update firmware for various Victron products which are connected to a [[venus-os:start|Venus-device]], for example the Color Control GX, via the command line, ie ssh.
-For more software developer oriented command line tips & tricks, see [[https://github.com/victronenergy/venus/wiki/commandline-introduction|here]] on the Venus wiki.
+For more software developer oriented command line tips & tricks, see [[https://github.com/victronenergy/venus/wiki/commandline-introduction|the Venus OS commandline manual for software development]] on the Venus wiki.
+To get started on Venus OS, start [[https://github.com/victronenergy/venus/wiki|here]].
 ==== 1.1 No support warning ====