hv_battery_compatibility:zyc
Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
| hv_battery_compatibility:zyc [2026-06-12 14:29] – created guy_stewart | hv_battery_compatibility:zyc [2026-06-22 09:35] (current) – [Compatibility status] guy_stewart | ||
|---|---|---|---|
| Line 16: | Line 16: | ||
| **SIMPO Pro S** | **SIMPO Pro S** | ||
| * Modules per stack: **16** (the product allows 10 - 16; 15 or fewer sits below the HS19 range) | * Modules per stack: **16** (the product allows 10 - 16; 15 or fewer sits below the HS19 range) | ||
| - | * Usable voltage range: **650 - 934 V** (battery floor is 640 V, so a sliver of capacity at the bottom is unusable; likely acceptable as the cutoff is rarely reached, confirm with ZYC) | + | * Usable voltage range: **650 - 934 V** |
| * Capacity: **82 kWh** per stack | * Capacity: **82 kWh** per stack | ||
| - | FIXME derived from spec table per-module voltages, not yet verified | ||
| - | ===== Full product | + | ===== Product |
| **SIMPO Pro E** | **SIMPO Pro E** | ||
| Line 34: | Line 33: | ||
| Both: 1 - 16 strings DC parallel; CAN / Modbus TCP / Modbus RTU; IP20/IP55. | Both: 1 - 16 strings DC parallel; CAN / Modbus TCP / Modbus RTU; IP20/IP55. | ||
| - | ===== Compatibility status ===== | ||
| - | |||
| - | * Test status: tested and running in field tests | ||
| - | * FDCan support: yes | ||
| ===== Setup guide ===== | ===== Setup guide ===== | ||
| - | FIXME Setup instructions | + | Contact battery manufacturer for setup instructions. |
hv_battery_compatibility/zyc.1781267344.txt.gz · Last modified: by guy_stewart