https://www.victronenergy.com/live/ 2026-08-24T07:29:40+00:00 https://www.victronenergy.com/live/ https://www.victronenergy.com/live/_media/wiki:dokuwiki.svg text/html 2021-03-20T02:05:56+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.victronenergy.com/live/ccgx:ccgx_wireless_ac_sensor?rev=1616205956&do=diff Wireless AC Sensor manual (discontinued product) Introduction The Wireless AC sensors are used to measure and calculate PV Inverter current (A), voltage (V), power (W) and energy (kWh), and show it on a GX device and the VRM Portal. An installation will have one gateway per system and one sensor per phase. The gateway connects to the GX device via Ethernet, and is the DECT hub for the sensors. Multiple sensors connect to 1 gateway. text/html 2025-03-28T17:10:03+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.victronenergy.com/live/ccgx:modbustcp_faq?rev=1743181803&do=diff GX Modbus-TCP Manual 1. Introduction Modbus-TCP is a feature on all our GX devices eg Cerbo GX, and Venus GX. Modbus-TCP is an industry standard protocol, that can be used to interface PLCs or other third party equipment with Victron products. Through the Modbus-TCP interface you can read and write data to the chargers, battery monitors, inverter/chargers and other products connected to the GX device.