https://www.victronenergy.com/live/ 2026-04-18T01:55:05+00:00 https://www.victronenergy.com/live/ https://www.victronenergy.com/live/_media/wiki:logo.png text/html 2026-01-20T07:15:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.victronenergy.com/live/battery_compatibility:remote_firmware_update?rev=1768893347&do=diff Remote firmware update for BMS-Can batteries via VRM 1. Introduction This manual describes how to remotely update firmware on third-party BMS-Can managed batteries via the VRM Portal. This functionality is limited to select manufacturers, and requires the battery to be connected to a text/html 2025-07-16T04:13:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.victronenergy.com/live/battery_compatibility:zyc_energy?rev=1752639229&do=diff Victron & ZYC Energy 1. Product & System compatibility 1.1 A GX device is required, eg Cerbo GX, etc It is essential to use the BMS-Can (or CAN-bus) connection of a GX device with these batteries for communication of charge and discharge limits, error codes and state of charge. This is set to 500 kbit/s. text/html 2025-12-15T09:47:28+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.victronenergy.com/live/battery_compatibility:byd_b-box?rev=1765792048&do=diff Victron & BYD Battery Pro 2.5-10.0 Pro 12.8 & 13.8 L 3.5-14.0 Premium LVL 15.4 Premium LVS 4.0 LV Flex 5 LV5.0+ Appearance ESS yes yes yes yes yes yes yes Grid Backup yes yes yes yes yes yes yes Off-Grid text/html 2025-06-17T00:56:04+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom?rev=1750121764&do=diff Victron & Pylontech UP2500, US2000, US3000, US2000C, US3000C, US5000, US5000B, UF5000, Pelio-L, UP5000, Phantom-S, Force-L1 & L2 The combination of Victron products with Pylontech lithium batteries has been tested and certified by the Victron and Pylontech R&D departments. text/html 2022-06-18T12:14:30+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.victronenergy.com/live/battery_compatibility:solar_md?rev=1655554470&do=diff Victron & SOLARMD Battery The combination of Victron products with SolarMD Battery lithium batteries has been tested and certified by the Solar MD R&D department. This combination has extensive field experience and is actively supported by Solar MD. text/html 2021-04-08T14:01:56+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.victronenergy.com/live/battery_compatibility:byd_b-box-steps?rev=1617890516&do=diff Offgrid Lithium - BYD on Victron install guide Installation experience and basic review for BYD B-Box Res IP55 with 4×2.5kWh batteries on Victron off-grid MultiPlus system. Guide by: Oliver Holmgren & Guy Stewart Disclaimer: Some of the information presented in this guide is now out-of-date and depreciated. For now it has been left here for historical and reference purposes. However it is not intended to represent the current best practice for part selection or procedure. Please refer to th… text/html 2026-03-16T11:59:51+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.victronenergy.com/live/battery_compatibility:sss?rev=1773662391&do=diff SSS StorageDOCK Batteries & Victron Energy This page describes how to set up Victron Energy systems with StorageDOCK batteries. StorageDOCK batteries communicate with the Victron GX device over BMS-Can. When correctly connected, the battery BMS transmits Charge Voltage Limit (CVL), Charge Current Limit (CCL), Discharge Current Limit (DCL), State of Charge (SOC), cell voltages, and temperature data to the GX device. The GX device then distributes these limits to all connected Victron inverter/ch… text/html 2024-10-25T05:50:12+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.victronenergy.com/live/battery_compatibility:pytes?rev=1729835412&do=diff Victron & Pytes 1. Product & System compatibility 1.1 A GX device is required, eg Cerbo GX, etc It is essential to use the BMS-Can (500 kbit/s) connection type of a GX device with these batteries for communication of charge and discharge limits, error codes and state of charge. text/html 2026-03-17T08:08:38+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.victronenergy.com/live/battery_compatibility:cegasa?rev=1773734918&do=diff Victron & Cegasa Battery EBick LV EBick LV 15 Appearance ESS yes yes Grid Backup yes yes Off-Grid yes yes Module capacity 13.5 kWh 15 kWh Module limit 20 20 Max capacity 270 kWh 300 kWh 1. Product & System compatibility text/html 2025-03-10T05:53:24+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.victronenergy.com/live/battery_compatibility:soluna?rev=1741586004&do=diff Victron & Soluna 1. Product & System compatibility 1.1 A GX device is required, eg Cerbo GX, etc It is essential to use the BMS-Can (500 kbit/s) connection type of a GX device with these batteries for communication of charge and discharge limits, error codes and state of charge. text/html 2025-03-10T05:00:03+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.victronenergy.com/live/battery_compatibility:sunwoda?rev=1741582803&do=diff Victron & Sunwoda 1. Product & System compatibility 1.1 A GX device is required, eg Cerbo GX, etc It is essential to use the BMS-Can (500 kbit/s) connection type of a GX device with these batteries for communication of charge and discharge limits, error codes and state of charge. text/html 2026-02-27T09:50:53+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.victronenergy.com/live/battery_compatibility:freedomwon?rev=1772185853&do=diff Victron & Freedom Won LiFePO4 Batteries - Freedom Won LiTE and eTower Installers Note Important: It is very important to read this documentation in full and carefully. Freedom Won battery warranties require that you have configured the battery correctly. text/html 2024-10-29T08:53:06+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.victronenergy.com/live/battery_compatibility:lbsa?rev=1730191986&do=diff Victron & LBSA 1. Product & System compatibility 1.1 A GX device is required, eg Cerbo GX, etc It is essential to use the BMS-Can (500 kbit/s) connection type of a GX device with these batteries for communication of charge and discharge limits, error codes and state of charge. text/html 2024-10-30T15:24:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.victronenergy.com/live/battery_compatibility:leoch?rev=1730301889&do=diff Victron & Leoch 1. Product & System compatibility 1.1 A GX device is required, eg Cerbo GX, etc It is essential to use the BMS-Can (500 kbit/s) connection type of a GX device with these batteries for communication of charge and discharge limits, error codes and state of charge. text/html 2022-04-07T08:40:50+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.victronenergy.com/live/battery_compatibility:bluenova?rev=1649320850&do=diff Victron Energy and BlueNova Energy LiFePo4 Batteries The BlueNova Energy (www.bluenova.co.za) range of Lithium Iron Phosphate batteries is compatible with Victron products in various systems. 1.1 Product and System Compatibility Victron + BlueNova Energy can be used for the following systems text/html 2024-10-22T10:19:03+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.victronenergy.com/live/battery_compatibility:dyness?rev=1729592343&do=diff Victron & Dyness 1. Product & System compatibility 1.1 A GX device is required, eg Cerbo GX, etc It is essential to use the BMS-Can (500 kbit/s) connection type of a GX device with these batteries for communication of charge and discharge limits, error codes and state of charge. text/html 2024-10-14T11:59:50+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.victronenergy.com/live/battery_compatibility:meterboost?rev=1728907190&do=diff Victron & MeterBoost 1. Product & System compatibility 1.1 A GX device is required, eg Cerbo GX, etc It is essential to use the BMS-Can (500 kbit/s) or VE.Can (250 kbit/s) connection of a GX device with these batteries for communication of charge and discharge limits, error codes and state of charge. text/html 2025-07-16T10:41:51+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.victronenergy.com/live/battery_compatibility:tab?rev=1752662511&do=diff Victron & TAB 1. Product & System compatibility TAB has undertaken full Victron BMS-Can specification compliance testing and has successfully passed. Testing was completed with TAB e.module L5.1 running BMS firmware version 0.3.5 and Cerbo GX running VenusOS v3.63 text/html 2024-06-17T12:52:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.victronenergy.com/live/battery_compatibility:weco?rev=1718628760&do=diff Victron & WeCo 1. Product & System compatibility 1.1 A GX device is required, eg Cerbo GX, etc It is essential to use the BMS-Can (500 kbit/s) connection type of a GX device with these batteries for communication of charge and discharge limits, error codes and state of charge. text/html 2024-05-28T08:21:52+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.victronenergy.com/live/battery_compatibility:bsl?rev=1716884512&do=diff Victron & BSLBATT Lithium batteries Wisdom Industrial Power Co. Ltd produces BSLBATT LiFePO4 batteries. 1. Product & System compatibility The integration with Victron and BSLBATT batteries has been tested, complies with Victron's BMS-Can specification, and is supported by both companies. text/html 2025-12-01T20:36:01+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.victronenergy.com/live/battery_compatibility:discover?rev=1764621361&do=diff Victron Energy and Discover Batteries The Discover Lithium Iron Phosphate batteries are compatible with Victron products in various systems. These instructions are intended to be used in conjunction with the product manuals supplied by Discover Energy Systems. text/html 2022-08-15T11:45:57+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.victronenergy.com/live/battery_compatibility:exide?rev=1660563957&do=diff Victron & Exide This combination depends on Venus OS v2.90 or above, which is scheduled to be released later in 2022. Or the latest beta (see Venus OS - Beta testing). The combination of Victron products with the Exide battery has been tested and certified by the R&D departments. The combination is actively supported by both companies. text/html 2025-06-02T07:37:46+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.victronenergy.com/live/battery_compatibility:lg_chem_resu?rev=1748849866&do=diff Victron & LG Chem Resu Compatibility NOTE - This document is now End-of-Life and for archive purposes only. LG no longer supports the Resu models that were previously compatible. The only Victron inverter/charger approved by LG for use with the Resu battery is the MultiPlus 48/3000/35. You are text/html 2026-03-09T06:47:18+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.victronenergy.com/live/battery_compatibility:hubble?rev=1773038838&do=diff Hubble Lithium and Victron Energy The Hubble Lithium range of LiFePO4 batteries is compatible with Victron products for various system types. Requirements * Hubble Battery * Hubble CloudLink & Cables (if not already integrated in a + model) * text/html 2020-04-28T05:59:14+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.victronenergy.com/live/battery_compatibility:redflow_zcell?rev=1588053554&do=diff Victron & Redflow ZBM2 / ZCell ZCell is a packaged bundle of the Redflow ZBM2 battery inside an external-rated enclosure, supplied with the Redflow CANbus BMS. The Redflow ZBM2 battery is a 48V 10kWh DC Zinc-Bromide hybrid flow battery that is installed in parallel-wired DC clusters. It is the worlds smallest commercial flow battery. It uses the Redflow CANbus BMS as the control and communications interface for the battery system.