Differences

This shows you the differences between two versions of the page.

--- ess:ess_mode_2_and_3 [2021-06-28 12:27] – [3.2 Using ModbusTCP] iburger
+++ ess:ess_mode_2_and_3 [2022-12-07 14:14] – [2.2 Accessing the control points] iburger
@@ Line 105: / Line 105: @@
   * com.victronenergy.settings /Settings/CGwacs/MaxDischargePower      (Maximum inverter power)
   * com.victronenergy.settings /Settings/SystemSetup/MaxChargeCurrent  (DVCC maximum charge current)
-  * com.victronenergy.settings /Settings/CGwacs/MaxFeedInPower         (Maximum system grid feed-in)
+  * com.victronenergy.settings /Settings/CGwacs/MaxFeedInPower         (Maximum system grid feed-in of excess power)
   * com.victronenergy.settings /Settings/CGwacs/OvervoltageFeedIn      (Feed-in excess DC-coupled PV)
   * com.victronenergy.settings /Settings/CGwacs/PreventFeedback        (Don't feed in excess AC-coupled PV)
@@ Line 273: / Line 273: @@
 (Length, 0xFF, ‘W’, 0x85, Lo(ValueA), Hi(ValueA), Lo(ValueB)*, Hi(ValueB)*, Checksum)
-ValueA is the contents of RAMID 128. In this example it is 0x0032 which indicates ESS with 2 extra RAMIDs.
+ValueA is the contents of RAMID 128. In this example it is 0x0032 which indicates AssistantID = 3 with 2 extra RAMIDs. (3 is the ID of HUB-4 which is the predecessor of the ESS assistant)
 //*) Please note  that you will get an extra ValueB. This is a feature of newer Multi firmware versions. Because the IDs range from 0..255 the Hi(ID) field would always be 0.
@@ Line 375: / Line 375: @@
   * Set register 37 to -1000
-===== DISQUS =====
-~~DISQUS~~