Differences

This shows you the differences between two versions of the page.

--- ess:ess_mode_2_and_3 [2020-07-08 15:48] – [2.1 Available control points] iburger
+++ ess:ess_mode_2_and_3 [2020-07-09 12:51] – [2.2 Accessing the control points] iburger
@@ Line 103: / Line 103: @@
   * com.victronenergy.settings /Settings/CGwacs/MaxChargePercentage    (Enable/Disable charger)
   * com.victronenergy.settings /Settings/CGwacs/MaxDischargePercentage (Enable/Disable inverter)
+  * com.victronenergy.settings /Settings/CGwacs/MaxDischargePower      (Maximum inverter power)
+  * com.victronenergy.settings /Settings/SystemSetup/MaxChargeCurrent  (DVCC maximum charge current)
+  * com.victronenergy.settings /Settings/CGwacs/MaxFeedInPower         (Maximum system grid feed-in)
+  * com.victronenergy.settings /Settings/CGwacs/OvervoltageFeedIn      (Feed-in excess DC-coupled PV)
+  * com.victronenergy.settings /Settings/CGwacs/PreventFeedback        (Don't feed in excess AC-coupled PV)
+  * com.victronenergy.hub4 /PvPowerLimiterActive                       (Read-only value indicating if limiting is active)
-Note that the paths are represented as percentage, but should be used as on/off switch (0: off,
+Note that the MaxChargePercentage and MaxDischargePercentage paths are represented as percentage, but should be used as on/off switch (0: off,
 : on).