Differences

This shows you the differences between two versions of the page.

--- ess:design-installation-manual [2019-01-23 06:09] – [9. FAQ] guy_stewart
+++ ess:design-installation-manual [2019-01-24 07:23] – [9. FAQ] guystewart
@@ Line 836: / Line 836: @@
 === Q7: How do the charge states work in ESS? ===
-  * The MPPTs are always in the `ESS` state. This indicates that the MPPT is being controlled by the Multi or Quattro. To view the system state, look at the VE.Bus State.
+  * The MPPTs are always in the `ESS` state. This indicates that the MPPT is being controlled by the Multi or Quattro via the Venus-device. To view the system state, look at the VE.Bus State.
   * While discharging, and connected to the grid, the state can still show a charge state, such as Bulk, Absorption or Float. Even though it is not charging. This is normal, nothing to worry about.
   * When in Float, the system will begin a new charge cycle when the battery voltage has been below the restart-voltage for a certain length of time. This voltage depends on the chosen battery type selected on the charger tab in VEConfigure: