Differences

This shows you the differences between two versions of the page.

--- energy-meters:et340 [2019-01-21 13:13] – [1. Introduction and usage] guy_stewart
+++ energy-meters:et340 [2020-06-27 13:23] – [Option A: wireless Zigbee connection] - note on compatibility boekel
@@ Line 1: / Line 1: @@
 ====== Energy Meter ET340 manual ======
 {{ :energy-meters:energy_meter_et340_right_.png?nolink&200|}}
@@ Line 18: / Line 17: @@
   - Direct connection, either using the RS485 to USB interface with 1.8m cable length, or the 5.0m cable.
   - Wireless connection via Zigbee
 ===== 2. AC Wiring =====
@@ Line 57: / Line 55: @@
 Connect the 12V DC power supply to the Zigbee to RS485 converter. When the power is switched on, check the LEDs again.
+=== note on old and new zigbee converters ===
+Please note that there is a new zigbee converter available now, that is -not- backwards compatible with the old converters. If you have a non compatible set, please ask your supplier for a correct version.
+'old' type:
+ASS300400100 - Zigbee to RS485 converter partnumber: DRF2619C
+ASS300400100 - Zigbee to USB converter   partnumber: DRF2618A
+'new' type:
+ASS300420100 - Zigbee to RS485 converter partnumber: DRF2659C
+ASS300420200 - Zigbee to USB converter   partnumber: DRF2658C
 ==== Option B: Wired connection to CCGX ====
@@ Line 80: / Line 92: @@
 {{ :energy-meters:em340_settings_detail.png?nolink |}}
-==== 4. Multiple Energy Meters in one system ====
+===== 4. Multiple Energy Meters in one system =====
 To connect multiple Energy Meters, wire each meter to a separate RS485-USB converter. Which are then each plugged into a separate USB socket on the CCGX.
 Connecting multiple ET340 meters to the same RS485-USB cable is not possible: the ET340 meter has no display and its Modbus address can therefor not be changed.
+===== DISQUS =====
+~~DISQUS~~