Differences

This shows you the differences between two versions of the page.

--- energy-meters:et340 [2019-01-21 13:13] – [1. Introduction and usage] guy_stewart
+++ energy-meters:et340 [2019-09-08 17:45] – mvader
@@ Line 1: / Line 1: @@
 ====== Energy Meter ET340 manual ======
 {{ :energy-meters:energy_meter_et340_right_.png?nolink&200|}}
@@ Line 18: / Line 17: @@
   - Direct connection, either using the RS485 to USB interface with 1.8m cable length, or the 5.0m cable.
   - Wireless connection via Zigbee
 ===== 2. AC Wiring =====
@@ Line 80: / Line 78: @@
 {{ :energy-meters:em340_settings_detail.png?nolink |}}
-==== 4. Multiple Energy Meters in one system ====
+===== 4. Multiple Energy Meters in one system =====
 To connect multiple Energy Meters, wire each meter to a separate RS485-USB converter. Which are then each plugged into a separate USB socket on the CCGX.
 Connecting multiple ET340 meters to the same RS485-USB cable is not possible: the ET340 meter has no display and its Modbus address can therefor not be changed.
+===== DISQUS =====
+~~DISQUS~~