Differences

This shows you the differences between two versions of the page.

--- energy-meters:et340 [2017-08-08 15:13] – [Energy Meter ET340 manual] edevries
+++ energy-meters:et340 [2019-09-08 17:45] – mvader
@@ Line 1: / Line 1: @@
 ====== Energy Meter ET340 manual ======
-{{ :energy-meters:et340-photo-0.jpg?nolink&200|}}
+{{ :energy-meters:energy_meter_et340_right_.png?nolink&200|}}
@@ Line 8: / Line 7: @@
 This document is the manual for the 3 phase max 65A per phase Energy Meter.
-The Energy Meter can be used for four things:
+The Energy Meter can be used to:
   - Grid meter, and used as control input for an [[assistants:ess-assistant|ESS System]] (1).
@@ Line 18: / Line 17: @@
   - Direct connection, either using the RS485 to USB interface with 1.8m cable length, or the 5.0m cable.
   - Wireless connection via Zigbee
-Note that this model is not stocked by Victron Energy, we recommend to purchase it locally.
 ===== 2. AC Wiring =====
 === 3-phase diagram: ===
-{{:energy-meters:et340_wiring_diagram.png?nolink&300}}
+{{:energy-meters:schema_-_et340.png?nolink&600}}
 When used to measure a PV Inverter, terminals 1, 2 and 3 should face the PV inverter to ensure correct direction of current and power.
@@ Line 32: / Line 29: @@
 In this diagram, a single meter is used to both measure the grid and a single phase PV Inverter.
-{{:energy-meters:et340_wiring_diagram_dual_function.png?nolink&300}}
+{{:energy-meters:schema_-_et340-2.png?nolink|}}
 On the CCGX go to the grid meter in the Wired AC sensor settings. Make sure 'Phase type' is set to 'Single phase' and 'PV inverter on phase 2' is enabled.
@@ Line 81: / Line 78: @@
 {{ :energy-meters:em340_settings_detail.png?nolink |}}
-==== 4. Multiple Energy Meters in one system ====
+===== 4. Multiple Energy Meters in one system =====
 To connect multiple Energy Meters, wire each meter to a separate RS485-USB converter. Which are then each plugged into a separate USB socket on the CCGX.