energy-meters:em24-eth
Differences
This shows you the differences between two versions of the page.
Last revisionBoth sides next revision | |||
energy-meters:em24-eth [2020-09-07 13:01] – created iburger | energy-meters:em24-eth [2020-09-07 15:20] – [3. GX Configuration] iburger | ||
---|---|---|---|
Line 49: | Line 49: | ||
In most networks the meter will be automatically configured by DHCP when plugged in. For larger installations we recommend configuring a static IP address. This avoids an address change if the DHCP server assigns a different IP address in future. | In most networks the meter will be automatically configured by DHCP when plugged in. For larger installations we recommend configuring a static IP address. This avoids an address change if the DHCP server assigns a different IP address in future. | ||
- | TODO: Document process | + | The configuration for Ethernet EM24 meters can be found under Settings -> Modbus TCP devices. The default is to scan for new devices every ten minutes, but a manual scan is also possible. |
+ | |||
+ | | ||
+ | |||
+ | Once a meter is found, it will be shown under Devices. It is also possible to manually define the connection details | ||
+ | |||
+ | {{ : | ||
+ | |||
+ | The meter will also show up on the Device List on the GX Device. Accessing it will show the relevant information. | ||
+ | |||
+ | {{ : | ||
+ | |||
+ | The role of the meter can also be changed through the Setup menu. The role will be one of Grid meter, PV inverter, or Generator. | ||
+ | |||
+ | {{ : | ||
== note on GX firmware versions: == | == note on GX firmware versions: == | ||
To support the ethernet EM24 meters, Venus 2.60 is the minimum firmware required on the GX device. | To support the ethernet EM24 meters, Venus 2.60 is the minimum firmware required on the GX device. |
energy-meters/em24-eth.txt · Last modified: 2022-08-09 16:16 by stefanie