User Tools

Site Tools


drafts:mppt_faq

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
drafts:mppt_faq [2019-06-05 15:59] – [Q8: Can I connect different panels to the same charge controller?] mvaderdrafts:mppt_faq [2021-09-30 07:18] (current) guystewart
Line 1: Line 1:
 ====== MPPT FAQ ====== ====== MPPT FAQ ======
  
-See also [[victronconnect:mppt-solarchargers|]]. 
 ==== Q1: I want to size or oversize my PV array, how can I do this? ==== ==== Q1: I want to size or oversize my PV array, how can I do this? ====
  
Line 9: Line 8:
  
 By default the RX pin is already used to control the battery life on/off selection with the jumper. Use VictronConnect to change the function of the RX pin to remote on/off to enable BMS control. See By default the RX pin is already used to control the battery life on/off selection with the jumper. Use VictronConnect to change the function of the RX pin to remote on/off to enable BMS control. See
-[[https://www.victronenergy.com/live/victronconnect:mppt-solarchargers#rx_port_function]] for details.+[[https://www.victronenergy.com/media/pg/Manual_SmartSolar_MPPT_100-30__100-50/en/configuration-and-settings.html#UUID-b6cabb55-8d14-4fc9-190f-c0856aab60d3]] for details.
  
 ==== Q3: My MPPT is only showing voltage readings, not currents and also no Watts? ==== ==== Q3: My MPPT is only showing voltage readings, not currents and also no Watts? ====
drafts/mppt_faq.1559743176.txt.gz · Last modified: 2019-06-05 15:59 by mvader

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki