Differences

This shows you the differences between two versions of the page.

--- drafts:dc_distribution [2018-07-30 07:53] – [Lynx Power in] mleeftink
+++ drafts:dc_distribution [2019-10-18 13:14] (current) – guy_stewart
@@ Line 1: / Line 1: @@
+moved to https://www.victronenergy.com/live/dc_distribution
-====== Lynx DC distribution system ======
-The lynx system is a modular DC bus bar system used to connect batteries, DC equipment and provide fusing and battery monitoring.
-It consists of the following modules:
-  * Lynx Power In
-  * Lynx Shunt
-  * Lynx Distributor
-===== Lynx Power in =====
-{{:drafts:lynx_power_in.png?200|}}
-The lynx power in module is used to connect batteries. It contains a negative and positive DC bus-bar with M8 bolts to connect batteries cables to.
-===== Lynx shunt =====
-The Lynx shunt contains a fuse in the positive bus-bar and a shunt in the negative bus-bar.
-It also contains a battery monitor electronics. The Lynx shunt can send via the VE.CAN bus battery motoring information to a CCGX or VGX or to a third party can bus monitoring system, such as a NMEA2000 (check with Johannes).
-The Lynx shunt is available in two models:
-  * VE.CAN
-  * VE.NET (depreciated)
-CIP140325000 - Fuse CNN 325A/80V for Lynx shunt
-cNN fuses by Little fuse see:
-===== Lynx Distributor =====
-uses MEGA fuses (please note that the MEGA fuse is only rated to 36Volt
-===== ===== Lynx Distributor ===== =====
-Contain Mega Fuses and a led for each fuse to indicate if fuse is blown
-green led = fuse is okay
-red led = blown fuse
-Lynx info
-===== MEGA Fuse =====
-Mega fuse info