Differences

This shows you the differences between two versions of the page.

--- ccgx:start [2019-08-28 23:57] – [4.4 DVCC features for all systems] mvader
+++ ccgx:start [2019-10-01 11:28] – [2.1 Configurable parameters] guy_stewart
@@ Line 178: / Line 178: @@
 | SMA |  No  | LAN Connection, see [[ccgx:ccgx_sma|GX - SMA manual]] |
 | SolarEdge |  No  | LAN Connection, see [[venus-os:gx_solaredge|GX - SolarEdge manual]] |
-| ABB |  Yes  | LAN Connection, see [[https://www.victronenergy.com/live/ccgx:abb|GX ABB manual]] |
+| ABB |  Yes  | LAN Connection, see [[https://www.victronenergy.com/live/ccgx:abb|GX - ABB manual]] |
 === Using a meter ===
@@ Line 186: / Line 186: @@
 ^ Type ^ Zero feed-in ^ Details ^
 | [[https://www.victronenergy.com/accessories/ac-current-sensor|AC Current Sensor]] |  No  | Connected to inverter/charger analog input. Lowest cost - least accurate. [[ac_current_sensor:start|AC Current Sensor Manual]] |
-| [[https://www.victronenergy.com/accessories/energy-meter|Energy Meter]] |  No  | wired to the CCGX, or connected wirelessly using our Zigbee to USB/RS485 interfaces. The best solution. See the [[energy-meters:start]] |
+| [[https://www.victronenergy.com/accessories/energy-meter|Energy Meter]] |  No  | wired to the CCGX, or connected wirelessly using our Zigbee to USB/RS485 interfaces. See the [[energy-meters:start]] |
-| [[https://www.victronenergy.com/accessories/wireless-ac-sensor|Wireless AC sensors]] |  No  | See the [[ccgx:ccgx_wireless_ac_sensor]] |
+| Wireless AC sensors |  No  | See the [[ccgx:ccgx_wireless_ac_sensor]] - Discontinued |
 ==== 1.6 Internet connectivity ====
@@ Line 335: / Line 335: @@
 |Enable password check | Choose password to allow remote console access.||
 |Enable on VRM |No|Enabling on VRM will allow connection to the CCGX from anywhere via the VRM portal. [[vrm_portal:troubleshooting_ccgx_vrm_connectivity#trouble_shooting_remote_console_on_vrm|Trouble shooting Remote Console on VRM]]|
-|Enable on LAN |No|Enabling will allow direct connection to the CCGX by typing it's IP address into a web browser. Only Enable this function on trusted networks.|
+|Enable on LAN |No|Enabling will allow direct connection to the CCGX by typing it's IP address into a web browser. Only Enable this function on trusted networks. Disable password check, or set password first|
 |**System setup** |||
 |AC input 1 |Generator |Select Generator or Grid. (We will shortly be adding the setting 'Shore power' instead of grid.) |
@@ Line 391: / Line 391: @@
 {{:ccgx:menustructure_ccgx.jpeg?direct&200  }}
 ==== 2.4 Battery State of Charge (SOC) ====
@@ Line 928: / Line 927: @@
   * [[https://docs.victronenergy.com/gx/mfd-garmin.html|Instructions for Garmin MFDs]]
-  * [[venus-os:mfd-navico|Instructions for Navico MFDs]]
+  * [[venus-os:mfd-navico|Instructions for Navico MFDs]] (Simrad, B&D, Lowrance)
 Raymarine: support on Raymarine MFDs is pending a Raymarine firmware update. [[https://www.victronenergy.com/blog/|Subscribe to our blog (link at the bottom)]], or for direct customers, monitor our weekly e-mail, to be informed about that release.