Differences

This shows you the differences between two versions of the page.

--- ccgx:start [2019-01-22 10:16] – external edit 127.0.0.1
+++ ccgx:start [2019-02-13 10:55] – martijncoster
@@ Line 10: / Line 10: @@
 ==== 1.1 Overview of connections ====
+{{ :ccgx:overview_ccgx_feb2019.png?nolink&800 |}}
-{{ :ccgx:ccgx_schematic_diagram.png?direct&700 |}}
 ==== 1.2 Snap-on ferrite beads for class B EMI compliance ====
@@ Line 101: / Line 100: @@
   - VE.Direct cables with an angled connector on one end. These are designed to minimize the required depth behind a panel, ASS030531xxx
-VE.Direct cables have a maximum length of 10 metres. It is not possible to extend them. If longer lengths are required, use the [[https://www.victronenergy.com/accessories/ve-direct-to-ve-can-interface|VE.Direct to VE.Can interface]]. Note that this is only works for BMV700 and BMV702. Not for the BMV712,  MPPT solar chargers and Inverters with a VE.Direct port. See next paragraph for more information on that VE.Can interface.
+VE.Direct cables have a maximum length of 10 metres. It is not possible to extend them. If longer lengths are required, use the [[https://www.victronenergy.com/accessories/ve-direct-to-ve-can-interface|VE.Direct to VE.Can interface]]. Note that this only works for BMV700 and BMV702. Not for the BMV712,  MPPT solar chargers and Inverters with a VE.Direct port. See next paragraph for more information on that VE.Can interface.
 __Connecting more than two devices to your CCGX using VE.Direct__